Fast, Reliable Gate Installation Across Tigard
Gate installation in Tigard typically runs $2,800-$7,500 for a standard residential driveway gate, with most projects completed in one to two days after HOA and permit approvals are secured. Our Gate Installation team has been working in Washington County since 1984, and we understand the specific steps Tigard homeowners face before a single post hole is dug.
We answer calls live, 24 hours a day, at (833) 754-7503. From the older subdivisions near downtown Tigard to the hillside homes on Bull Mountain off Scholls Ferry Road, we arrive prepared for the clay soil, the winter rain, and the architectural review boards that govern this market. Tigard is not Portland, and it is not unincorporated Washington County. The permitting, the soil, and the HOA requirements are their own thing. We know them because we have worked here for decades.
Why Ironworks Gate Co. Is Tigard’s Preferred Gate Installation Company
Tigard homeowners do not want to explain their neighborhood’s rules to a contractor who drove up from Salem or down from Vancouver. They want someone who already knows that Bull Mountain’s HOAs require pre-approval of gate materials and colors, that Washington County handles permits rather than Portland, and that a gate post set at 18 inches will heave out of plumb by March. We have installed gates on Scholls Ferry Road, in the Summerfield planned community, and along the steep grades of Bull Mountain’s 1990s-era developments. That local knowledge saves days of delays.
Our customers in 97223 and surrounding Tigard ZIPs have left us strong reviews over the years, citing our punctuality and our willingness to handle the HOA paperwork rather than dump it on the homeowner. We do not subcontract to day laborers. Our technicians are background-checked, uniformed, and trained on nine automation brands, including FAAC, BFT, and Linear systems commonly specified by Tigard’s higher-end developments.
Response time to Tigard is same-day or next-day for most calls. We stock hardware and automation components for the brands we service, so we are not waiting on a parts truck from Portland while your driveway sits open.
Our Gate Installation Services in Tigard
Swing Gate Installation in Tigard
Swing gates remain the most common request in Tigard’s flat neighborhoods and in cul-de-sacs off Hall Boulevard, where driveway grades allow a clean arc. On Bull Mountain, swing gates demand careful hinge alignment to account for slope. We measure grade change in degrees, not guesses, and we set posts with concrete collars extending below the 24-inch frost line to counter the Tualatin Valley clay’s seasonal swell. A swing gate that drags in February was not installed with Tigard’s soil in mind. We install them so they swing true in August and in April.
Sliding Gate Installation in Tigard
Sliding gates solve the grade problems that plague swing gates on steep lots. In Tigard’s Bull Mountain hillside developments, a sliding gate tracks along the fence line rather than swinging into a sloped driveway. We install V-track or cantilever systems depending on the run length and the ground contour. The track must be level, but the driveway beneath it does not need to be. For homeowners whose HOAs restrict gate styles, sliding gates often meet ARB requirements while solving a practical problem that swing gates cannot. We have installed sliding gates on Scholls Ferry Road properties where the grade drops three feet across a sixteen-foot driveway opening.
Double Gate Installation in Tigard
Double gates, or bi-parting swing gates, suit wider driveways common in Tigard’s 1980s and 1990s subdivisions. Each leaf carries half the weight, reducing stress on posts and hinges. We see these frequently in the Summerfield area and in communities off Durham Road. The critical detail is synchronized automation. If one leaf closes a half-second before the other, the latch misses and the motor strains. We program and test every double gate installation on-site, using automation systems from Viking, Linear, or other brands we certify, until both leaves meet flush every time.
Driveway Gate Installation in Tigard
Driveway gates in Tigard range from simple cedar privacy gates in 1970s neighborhoods to ornamental iron installations in newer communities. Every driveway gate we install in Tigard begins with a site survey that accounts for Washington County setback rules, HOA ARB requirements, and soil conditions. We do not sell you a gate from a catalog and hope it fits. We measure, we check the CC&Rs, and we specify materials that the ARB will approve without a second submission.
Pedestrian Gate Installation in Tigard
Pedestrian gates see more daily cycles than driveway gates and wear faster. In Tigard’s wet climate, the lower rail of a wooden pedestrian gate rots first. We specify pressure-treated or cedar stock with stainless steel hardware, and we elevate the bottom rail at least two inches above grade to shed water. For HOA communities, we match the pedestrian gate to the driveway gate in material, color, and hardware finish to maintain uniform streetscape standards.
Security Gate Installation in Tigard
Security gates in Tigard often integrate with access control systems: keypads, telephone entry, or remote receivers. We install and program these systems as part of the gate package, not as an afterthought. In gated communities and on larger Bull Mountain estates, we coordinate with property managers and HOA boards to ensure the access system meets community standards and emergency override requirements.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Tigard
We are trained and equipped to service and install nine major gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Tigard customers, this means we stock parts for the systems specified by local HOAs and preferred by regional installers. A FAAC or BFT operator specified by your community’s original developer does not require a special order when we arrive. We carry common FAAC control boards, BFT limit switches, and Linear actuator arms on our trucks. That inventory translates to faster completion and fewer return trips. We also certify our installations with the manufacturer’s warranty in addition to our own 90-Day Done Right Promise.
Common Gate Installation Problems We See in Tigard Homes
- Post footings heave in clay soil. Tigard’s Tualatin Valley clay swells with winter rain and shrinks in summer drought. A post set at 18 inches with a minimal concrete collar will shift. We dig to 30 inches minimum and use rebar-reinforced collars that extend below the frost line.
- HOA violations from unapproved hardware finishes. Black hinges specified, bronze installed. The ARB notice arrives two weeks later. We submit color chips and hardware specs for approval before ordering materials, eliminating the rework.
- Wood gates rot at the bottom rail. Tigard’s 38-40 inches of annual rainfall, concentrated October through April, saturates wood in contact with soil or pavement. We specify cedar or pressure-treated stock, elevate the rail, and use stainless steel fasteners.
- Swing gates bind on sloped Bull Mountain driveways. Hinges aligned for a flat grade will torque as the gate swings through the slope’s contour. We calculate hinge offset and sometimes recommend a sliding gate instead.
Pricing for Gate Installation in Tigard, OR
Gate installation in Tigard follows real ranges tied to gate type, materials, and automation. These are current market figures for Washington County, based on our 2024-2025 project history:
| Gate Type | Typical Range in Tigard |
|---|---|
| Single swing gate, wood, manual | $2,800 - $4,200 |
| Single swing gate, wood, automated | $4,500 - $6,800 |
| Double swing gate, ornamental iron, automated | $6,200 - $9,500 |
| Sliding gate, steel or aluminum, automated | $5,800 - $8,400 |
| Pedestrian gate, wood, manual | $1,400 - $2,600 |
| Access control system (keypad, telephone entry, remote) | $1,200 - $3,800 |
Factors that move a project within these ranges: HOA ARB submission and revision cycles (unpaid, but they delay start), Washington County permit fees, the depth of excavation required in clay soil, and automation brand specified by the community. We provide a written, itemized estimate before work begins. No surprises on the bill. Call (833) 754-7503 for a free estimate at your Tigard property.
We Also Serve Cities Near Tigard
Our service area covers all of Washington County and adjacent communities. We regularly install and repair gates in Tigard, Garden Home-Whitford, Beaverton, Cedar Hills, and Raleigh Hills. Each city has its own permitting authority and soil conditions. We know the difference between a Beaverton job and a Tigard job, and we arrive prepared for the specific requirements of each.
Serving Tigard, OR - Our Local Coverage Area
We’re based in the Tigard area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Tigard
Yes, if your property is in an HOA-governed subdivision, which covers most of Tigard’s planned communities on Bull Mountain and along Scholls Ferry Road. The architectural review board must approve materials, colors, and hardware finishes before work begins, and many HOAs prohibit DIY alterations entirely. We handle the ARB submission as part of our standard process, including color chips, hinge specs, and elevation drawings. Call (833) 754-7503 and we will review your community’s CC&Rs at no charge.
We dig to 30 inches minimum in Tigard’s Tualatin Valley clay, with rebar-reinforced concrete collars extending below the 24-inch frost line. Shallower footings heave seasonally as the clay swells with winter rain and shrinks in summer drought. We replaced a rotted cedar driveway gate on a Bull Mountain lot (off Scholls Ferry Road) where our crew dug 30-inch post footings through clay soil and used stainless steel hardware to withstand Tigard’s 38-inch annual rainfall. Before starting, we submitted color chips and hinge specs to the HOA’s ARB; the approval came in three days, and our concrete collars with rebar anchors kept the posts plumb through the winter heave cycle.
Cedar and pressure-treated wood resist rot better than fir or pine, but all wood requires maintenance in Tigard’s 38-40 inches of annual rainfall. For zero-maintenance longevity, we specify powder-coated steel or aluminum frames with composite or metal infill. Stainless steel hardware is essential regardless of frame material. We match the material to your HOA’s approved palette and your maintenance preference. Call (833) 754-7503 to discuss options for your specific Tigard property.
Yes, and it is often the better choice for steep grades where a swing gate would bind or require excessive clearance. A sliding gate tracks parallel to the fence line and does not need the level swing arc that a hillside driveway cannot provide. We have installed sliding gates on Bull Mountain properties with grades exceeding 8 percent. The track must be level, which we achieve with a retaining wall or ground preparation, but the driveway itself does not need to be flattened.
Washington County, not Portland, governs setbacks for Tigard properties. Structural gate or fence work triggers county-level permits with setback and height rules that differ from Portland’s. A gate installed inside the property line typically does not affect front-yard setback, but posts and footings must respect utility easements and sidewalk clearances. We verify setback requirements during our site survey and include permit coordination in our project scope. Call (833) 754-7503 for a free estimate that accounts for your lot’s specific constraints.
Ready to get started? Call Ironworks Gate Co. at (833) 754-7503 for a free, written estimate on gate installation at your Tigard home. We will review your HOA requirements, check your soil conditions, and give you an upfront price with no surprises on the bill. Same-day and next-day appointments available. Live person answers every call, 24 hours a day, 7 days a week.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Tigard and Washington County since 1984.