Fast, Reliable Gate Installation Across San Lorenzo
Gate installation in San Lorenzo typically runs $2,800-$7,500 for a standard residential job, with most homeowners near San Lorenzo Village seeing quotes in the $3,200-$4,800 range for a complete swing or double gate with basic automation. We’re usually on-site in San Lorenzo within the same day you call, and we carry the hardware and automation parts to finish most installations in a single visit. Call (833) 754-7503 - a live person answers, 24 hours a day.
We’ve been driving out to San Lorenzo since 1984, back when the original 1940s and 1950s gates in San Lorenzo Village were still middle-aged. Now they’re failing in waves. The marine layer rolling in from San Francisco Bay, just three miles west, has been eating hinge pintles and corroding wrought-iron frames for seventy-plus years. We’ve replaced gates on Via Alamitos, installed openers on homes near Lewelling Boulevard, and pulled permits through Alameda County Planning & Building more times than we can count - because San Lorenzo isn’t incorporated, and that’s where your paperwork goes. Out-of-area contractors miss this constantly. We don’t.
Why Ironworks Gate Co. Is San Lorenzo’s Preferred Gate Installation Company
San Lorenzo homeowners call us because we know the Village. We know the 94580 ZIP code covers everything from the creek-side homes near San Lorenzo Creek to the ranch-style lots off Hesperian Boulevard, and we know the gates on all of them were installed during the Truman and Eisenhower administrations. That’s not an exaggeration - San Lorenzo Village was built almost entirely between 1944 and 1955, making it one of the Bay Area’s largest planned postwar tract communities. When your housing stock is this uniform and this old, gate problems cluster. We see the patterns.
Our reviews from San Lorenzo customers mention the same things repeatedly: we show up when we say, we explain the permit situation clearly, and we don’t push replacement when repair is honest. Response time to San Lorenzo averages under 90 minutes during business hours, and our 24/7 live phone means you’re never waiting until Monday to schedule. Every job carries our 90-Day Done Right Promise - written, no paperwork, no arguing. If it’s not right, we come back and make it right.
The county permit process trips up homeowners and contractors alike. We’ve walked hundreds of San Lorenzo residents through Alameda County Planning & Building requirements, and we handle the drawings and submittals as part of our standard installation package. You shouldn’t need to become an expert in unincorporated county jurisdiction just to get a new driveway gate.
Our Gate Installation Services in San Lorenzo
Swing Gate Installation
Swing gates remain the most common type in San Lorenzo Village, matching the modest lot sizes and straightforward driveways of the original postwar design. We install single and double swing gates with proper post footings rated for Alameda County’s clay-heavy soils, and we always spec corrosion-resistant hardware - the salt-laden bay fog here destroys standard hinges in half the time you’d see inland. Our Gate Installation team can automate your new swing gate with operators from LiftMaster, FAAC, or Linear, programmed for your specific clearance and slope.

Double Gate Installation
Double gates are the practical choice for wider San Lorenzo driveways, especially where two cars park side by side or where a single wide panel would overstress aging posts. We see a lot of original double gates in the Village where one leaf has sagged into the other, scraping concrete and binding the latch. Our double gate installations include independent post systems for each leaf, synchronized automation, and adjustable drop rods that tolerate the minor settling these old properties continue to experience.

Security Gate Installation
San Lorenzo’s unincorporated status means no municipal police force - coverage comes from Alameda County Sheriff. Many homeowners near the creek corridor and along the busier stretches of Hesperian Boulevard tell us they want controlled access without looking like a fortress. We install security gates with keypad, remote, and smartphone entry that blend with the Village’s modest architectural scale. Steel-framed with powder-coated finishes, they’re built to resist the corrosion that kills lesser gates in this climate.

Sliding Gate Installation
Sliding gates make sense on San Lorenzo lots where a swing gate would encroach on sidewalk space or where the driveway angles sharply from the street. We install cantilever and track-mounted systems with concrete footings engineered for the soil conditions - critical near San Lorenzo Creek, where seasonal saturation can shift standard posts within a few seasons. Viking and BFT sliding operators are our usual recommendations here for their tolerance of minor track misalignment.

Pedestrian Gate Installation
The original San Lorenzo Village homes often included side-yard pedestrian gates that have rusted shut or lost their latches decades ago. We match new pedestrian gates to existing driveway gates for a consistent look, or install standalone walk-through gates where the original layout never included one. All hardware is stainless or zinc-plated, rated for the salt air that reaches even the interior blocks of the Village.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in San Lorenzo
We stock parts and complete systems from nine automation brands - LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule - so your San Lorenzo installation isn’t delayed waiting for a special-order component. For the Village’s corrosive environment, we typically recommend FAAC or BFT operators with sealed gearboxes and stainless-steel hardware, or Linear systems with their coated circuit boards. We keep common operator models, replacement arms, and control boards on our trucks, which is how we finish most San Lorenzo gate installations in one visit. No return trip, no extra day of an open driveway.
Common Gate Installation Problems We See in San Lorenzo Homes
- Corroded hinge pintles from marine-layer salt. The original wrought-iron gates throughout San Lorenzo Village were hung on plain steel pintles. Seven decades of salt-laden fog have reduced many to swollen, seized stubs that snap when the gate weight shifts. We replace these with stainless-steel or bronze hinge assemblies rated for coastal exposure.
- Shifted or sunken concrete post footings. Especially near San Lorenzo Creek, periodic soil saturation causes posts to heave or settle, throwing the gate out of square. Out-of-area companies often misdiagnose this as a hinge problem and keep adjusting hardware until the posts fail completely. We pull and re-pour with proper depth and drainage.
- Obsolete springs and operators with zero parts availability. Many 1950s swing gates used proprietary spring mechanisms or early opener brands that disappeared decades ago. We encounter these on Via Alamitos and similar Village streets regularly. Retrofit with a modern operator is usually the only honest recommendation.
- Wood gate frames rotted at the bottom rail. The original cedar and redwood gates common in San Lorenzo’s postwar construction wick moisture from concrete walks and planter beds. The bottom rail goes soft while the top looks fine. We rebuild with pressure-treated or composite bottom rails, or replace with steel-framed, wood-clad gates that carry the same look without the rot.
Pricing for Gate Installation in San Lorenzo, CA
A typical swing gate installation in San Lorenzo runs $2,800-$4,200 for a standard single-leaf steel or aluminum gate with manual operation. Add automation with a quality operator, and you’re looking at $3,800-$5,600. Double gates with dual operators typically fall in the $4,500-$7,500 range, depending on width and material. Security gates with access control start around $5,200 and scale with features - keypad, remote, smartphone integration, intercom.
What moves the number: material (steel vs. aluminum vs. wood-clad), automation brand and features, whether existing posts can be reused or need full replacement, and the county permit submittal complexity. We settle on an upfront price before we turn a single bolt. No surprises on the bill. Call (833) 754-7503 for a free estimate - we’ll measure, assess your posts, and give you a written number that same visit.
| Gate Type | Typical Range in San Lorenzo |
|---|---|
| Single swing gate, manual | $2,800 - $4,200 |
| Single swing gate, automated | $3,800 - $5,600 |
| Double swing gate, automated | $4,500 - $7,500 |
| Sliding gate, automated | $4,200 - $6,800 |
| Security gate with access control | $5,200 - $8,500 |
| Pedestrian gate, standalone | $1,800 - $3,200 |
We Also Serve Cities Near San Lorenzo
Our crews work throughout the unincorporated areas and nearby cities surrounding San Lorenzo - San Lorenzo is our home base, but we regularly install and repair gates in Ashland, San Leandro, Cherryland, and Castro Valley. The same county permit process, the same bay-fog corrosion patterns, the same postwar housing stock. If you’re in one of these neighboring communities and found this page, the same pricing, guarantees, and same-day response apply.
Serving San Lorenzo, CA - Our Local Coverage Area
We’re based in the San Lorenzo area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in San Lorenzo
Yes - because San Lorenzo is unincorporated Alameda County, not an incorporated city, all gate and fence permits route through Alameda County Planning & Building, not a city hall. Many homeowners and out-of-area contractors assume San Lorenzo has its own permitting department and waste weeks chasing the wrong office. We handle the county submittal, site drawings, and inspection scheduling as part of our standard installation. Call (833) 754-7503 and we’ll walk you through exactly what your property requires.
Sometimes, but not usually. On homes near San Lorenzo Creek, what looks like hinge sag is often post heave from creek-driven soil saturation. Adjusting hinges on a shifted post buys you months, not years, and eventually the gate tears free entirely. We assess the post footing first. If it’s sound, a proper hinge upgrade with stainless hardware solves it. If the post has moved, we replace and re-pour. Either way, you get an honest diagnosis and a price that covers the real fix.
Stainless-steel hinge pintles, bronze or polymer bushings, and powder-coated or galvanized steel frames. Standard zinc-plated hardware that lasts fifteen years inland might fail in seven here. We spec marine-grade hardware on every San Lorenzo installation - it’s not an upsell, it’s the correct specification for this climate. The extra cost is modest compared to replacing corroded hardware twice.
No - they’re different machines entirely. Sectional garage door openers pull a door straight up on tracks; swing gate operators push or pull a leaf through an arc, with adjustable torque limits for wind resistance and obstacle detection. We encounter this confusion often in San Lorenzo Village, where homeowners have replaced their garage door and assume the same opener type applies. We install the correct operator for your gate type, with the proper safety entrapment protection Alameda County requires.
If the frame is structurally sound and the style matches your home, repair with upgraded hardware and a new operator can give you another twenty years. But if the wrought iron has section loss from corrosion, the wood rails are rotted, or the original spring mechanism has no parts availability, replacement is the honest call. We don’t sell gates to people who need hinges. We’ll show you exactly what we find and price both paths so you can decide. Estimates are free - call (833) 754-7503.
On Via Alamitos in San Lorenzo Village, we replaced a 1955 original wrought-iron gate whose pintles had corroded through from salt-laden bay fog. The homeowner wanted a simple repair, but we showed them the sag was actually from a shifted post foot - a classic creek-zone heave near San Lorenzo Creek. We installed a new LiftMaster swing gate operator with stainless hardware to resist future corrosion. Done right, and backed in writing.
Ready for a gate that works and stays working? Call Ironworks Gate Co. at (833) 754-7503 for your free San Lorenzo estimate. A live person answers, day or night. We’ll measure your opening, check your posts, explain the county permit path, and give you an upfront price with no surprises on the bill. Senior and Veteran discounts apply. The 90-Day Done Right Promise covers every job.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving San Lorenzo since 1984.