Fast, Reliable Gate Installation Across Kendall
Gate installation in Kendall typically runs $2,800-$7,500 for a complete residential system, with most heavy-duty acreage properties falling in the $4,200-$6,800 range. We carry LiftMaster, Viking, and Ghost Controls operators on every truck, so most Kendall installations finish in a single visit. Call (833) 754-7503 for a free, no-obligation estimate.
We’ve been installing gates in Kendall since 1984. That means we’ve worked on the original swing-arm operators in The Hammocks, replaced corroded control boards after summer flooding on properties near Old Cutler Road, and fitted heavy-duty systems for acreage lots throughout the 33156 zip code. Kendall’s flat, low-lying terrain and strict Miami-Dade wind-load codes make gate installation here different from anywhere else in South Florida. We know the permitting process, we know what fails, and we stock the parts to fix it without a second trip.
Why Ironworks Gate Co. Is Kendall’s Preferred Gate Installation Company
Kendall homeowners don’t have patience for callbacks. When you’ve got a 12-foot driveway gate on a five-acre property and a detached workshop that needs its own pedestrian entrance, you need the job done once, done correctly, and backed in writing. That’s exactly what we deliver.
Our reputation in Kendall is built on showing up when we say we will. A live person answers our phone 24 hours a day, 7 days a week - no voicemail, no callback queue, no waiting until Monday morning. Our background-checked, uniformed technicians work under our K.E.Y.S. code: Krafted right, Every time, Your home first, Standing behind it. The 400th gate installation in Kendall receives the same care as the first.
We recently installed a heavy-duty swing gate system at a 5-acre property off Old Cutler Road, replacing a 30-year-old Apollo operator that had failed. The homeowner needed a single-trip solution for their oversized 12-foot driveway gate and detached workshop entrance, so we fitted a LiftMaster pneumatic vehicle gate opener with surge protection, ensuring the install met Miami-Dade wind-load requirements. Jobs like this are why we keep commercial-grade operators and heavy torsion springs on every truck.
Every installation we complete in Kendall is protected by our 90-Day Done Right Promise - the Keystone Standard. Written guarantee, no paperwork, no arguing, no exceptions. If it’s not right, we come back and make it right.
Our Gate Installation Services in Kendall
Swing Gate Installation
Swing gates remain the most common residential installation across Kendall’s 1980s and 1990s subdivisions. On acreage properties near Old Cutler Road and throughout the Pinecrest-adjacent areas, we regularly install single and double swing systems with reinforced posts rated for Miami-Dade’s post-Hurricane Andrew wind-load requirements. Oversized gates on these larger lots require heavier torsion springs and commercial-grade operators. Undersize the opener, and you’ll be calling someone back within a year. We don’t undersize.
Sliding Gate Installation
Sliding gates make sense for Kendall properties with steep entry approaches or limited swing clearance. In communities like The Hammocks where HOA specifications often dictate gate style, we install cantilever and V-track sliding systems that meet association standards while handling the heavier gauge materials required by county code. Our Gate Installation team carries Viking and Elite operators specifically for these high-cycle applications.
Double Gate Installation
Double gates - two independent swing leaves meeting in the center - are standard issue across Kendall’s master-planned communities. We install these with synchronized operators, proper center-stop hardware, and the reinforced hinges that South Florida’s salt air demands. For HOA-managed properties, we handle the specification documentation the board requires before approving any exterior modification.
Driveway Gate Installation
Whether you’re replacing a failed original system on a 1990s-built home or adding a first gate to an acreage property, we measure, specify, and install driveway gates that match Kendall’s architectural character. That means ornamental aluminum and wrought-iron styles that complement the Mediterranean and ranch-influenced homes common throughout 33156. We settle on upfront pricing before turning a single bolt - a square deal, no surprises on the bill.
Pedestrian Gate Installation
Detached workshops, pool houses, and secondary structures on Kendall’s larger properties need their own secure access. We install pedestrian gates with standalone keypads, card readers, or wireless remotes integrated into your main gate’s access control system. Same materials, same wind-load rating, same single-visit completion when possible.
Security Gate Installation
For properties requiring controlled access without aesthetic compromise, we install security-rated gates that meet insurance requirements and HOA covenants alike. Reinforced frames, tamper-resistant hardware, and integrated camera or intercom mounting points come standard on our security installations throughout Kendall.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Kendall
We are trained and equipped on nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Kendall’s heavy-duty and acreage installations, we most often specify Viking operators for their continuous-duty cycle ratings, Ghost Controls for solar-compatible rural properties without nearby electrical service, and DoorKing for multi-entrance HOA systems requiring centralized access control. We stock local parts for fast turnaround when an operator needs replacement under our 90-Day Done Right Promise.
Common Gate Installation Problems We See in Kendall Homes
- Oversized gates paired with undersized operators. Acreage properties throughout Kendall feature 12-foot and 14-foot driveway gates that standard residential openers cannot reliably move. We see premature motor failure within months when the previous installer sized for cost instead of duty cycle. We spec commercial-grade operators with proper horsepower margins.
- Control board corrosion from standing water. Kendall’s flat, low-lying terrain means gate operator housings regularly sit in pooled water after the intense afternoon thunderstorms that run June through October. Moisture intrusion is the leading local failure mode. Our installations include sealed housings and elevated mounting where site conditions allow.
- Lightning-damaged circuit boards. Those same storms bring frequent lightning strikes that fry access-control electronics. Installations that skip surge protection face repeat callbacks. We include surge suppression as standard on every Kendall installation, not as an upsell.
- Non-compliant wind-load ratings. Miami-Dade County’s post-Hurricane Andrew requirements are among the strictest in the nation. Gate replacement panels and operators alike must meet specific wind-load standards. We handle the permitting and inspection documentation so your installation passes the first time.
Pricing for Gate Installation in Kendall, FL
| Service | Typical Range in Kendall |
|---|---|
| Single swing gate with standard operator | $2,800 - $4,200 |
| Double swing gate with dual operators | $4,200 - $6,200 |
| Sliding gate with commercial-grade operator | $5,500 - $7,500 |
| Pedestrian gate (standalone) | $1,800 - $3,200 |
| Surge protection upgrade | $280 - $450 |
| Access control keypad or card reader | $340 - $680 |
What moves a Kendall installation toward the higher end: oversized gates requiring commercial operators, HOA-mandated materials or styles, electrical trenching for remote power, and additional access-control integration. What keeps costs controlled: standard sizes, existing electrical service at the gate location, and straightforward post-setting in native soil rather than rock or fill.
We offer $50 off any repair over $250, a permanent 5% Senior and Veteran discount, and free estimates with upfront pricing settled before work begins. Call (833) 754-7503 for your exact quote.
We Also Serve Cities Near Kendall
Our installation crews regularly work in Pinecrest, Glenvar Heights, South Miami, and Cutler. The same flat-terrain drainage challenges, the same afternoon thunderstorm patterns, the same Miami-Dade wind-load codes apply throughout the area. If you’re near Kendall, we know your conditions.
Serving Kendall, FL - Our Local Coverage Area
We’re based in the Kendall area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Kendall
Yes, if your property is within a master-planned community like The Hammocks or any of the dozens of HOA-governed subdivisions built in the 1980s and 1990s. Most Kendall HOAs require architectural review board approval before any exterior modification, including gate style, materials, and operator specifications. We provide the technical documentation and wind-load certifications most boards require, and we have established working relationships with several Kendall property management companies that streamline the approval process. Call (833) 754-7503 and we’ll review your HOA requirements during your free estimate.
LiftMaster’s commercial pneumatic vehicle gate openers and Viking’s continuous-duty hydraulic operators are the two brands we specify most often for Kendall’s oversized gates. Both handle 12-foot to 16-foot single swing applications without strain, include battery backup for power outages during storm season, and carry the wind-load ratings Miami-Dade requires. For properties without nearby electrical service, Ghost Controls solar-compatible systems are a proven alternative. We stock all three brands locally for same-day installation. Call (833) 754-7503 to discuss which fits your gate size and usage pattern.
Proper surge protection and sealed housing installation are essential. We install surge suppressors at both the power source and the control board on every Kendall gate system, and we elevate operator housings above typical standing-water levels where site grading allows. For properties in the lowest-lying areas of 33156, we also specify marine-grade enclosures with sealed cable entry points. These measures add $280-$450 to a typical installation and eliminate the repeat callbacks we see on systems that skipped them. Call (833) 754-7503 to add storm protection to your existing gate or new installation.
Yes, we regularly install integrated systems with a primary driveway gate and one or more pedestrian gates for workshops, pool houses, and secondary structures on Kendall’s larger properties. The pedestrian gate can share the main access control system or operate independently with its own keypad or remote. We recently completed exactly this configuration off Old Cutler Road, fitting a LiftMaster pneumatic opener on the main 12-foot swing gate and a standalone keypad entry on the workshop pedestrian gate, all permitted and inspected to Miami-Dade code. Call (833) 754-7503 for a free estimate on your multi-gate layout.
Most standard installations in Kendall are completed in one to two days once materials arrive, with custom-fabricated gates adding one to two weeks for welding and powder coating. HOA approval processes vary by community - The Hammocks and similar large associations typically review within 10-14 business days, while smaller HOAs may move faster. Miami-Dade permitting for wind-load-compliant installations adds 5-10 business days for review. We handle all documentation and scheduling, and we coordinate inspections so you don’t wait at home for the county. Call (833) 754-7503 to discuss your property’s specific timeline.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Kendall since 1984.