Fast, Reliable Gate Installation Across Five Corners
Gate installation in Five Corners, WA typically runs $2,800-$7,500 depending on gate type, automation, and how we handle the clay soil beneath your posts. Most Five Corners jobs are completed in a single day, with upfront pricing settled before we dig the first footing. Call (833) 754-7503 for a free estimate.
We’ve been installing gates in Five Corners since the early 1990s, and we know the ground here better than most contractors who pass through from Portland or Vancouver. The clay soils off NE Fourth Plain and around the older neighborhoods east of Andresen Road don’t forgive shortcuts. A gate that looks perfect in September can be dragging and binding by February if the posts aren’t set deep enough with proper drainage. That’s why our Gate Installation team treats every Five Corners job as a footing problem first and a gate problem second. We serve the full 98662 ZIP, from the ranch homes near Northeast 78th Street to the newer infill off 112th Avenue, and we keep our trucks stocked so we’re not making two trips.
Why Ironworks Gate Co. Is Five Corners’s Preferred Gate Installation Company
Ironworks Gate Co. has served Clark County homeowners for over 42 years, and Five Corners has been in our rotation since the day we started. We know which lots were cut into hillside clay in the 1970s and which were backfilled during the 2000s building boom. That history matters when we’re deciding how deep to dig and what hardware to spec.
Our technicians are background-checked, uniformed, and trained on nine gate-automation brands including Viking, Ghost Controls, and DoorKing. When a Five Corners customer calls, a live person answers the phone 24 hours a day, 7 days a week. No voicemail trees. No callback queues. We answer because many of our customers are retired or work irregular hours, and they prefer to talk through a project rather than fill out a web form.
Most of our Five Corners calls come from homeowners who have already had one bad experience. A gate that heaved after the first winter. An opener that failed in its second year because it wasn’t rated for Gorge wind load. We get those calls, and we fix them permanently. Every job carries our written 90-Day Done Right Promise. If it’s not right, we come back and make it right. No paperwork, no arguing, no exceptions.
Our Gate Installation Services in Five Corners
Sliding Gate Installation
Sliding gates are our most requested installation in Five Corners, especially for homeowners with detached workshops, RV pads, or long gravel drives where a swing gate would need too much clearance. We install steel-track and cantilever systems rated for the lateral stress that east Gorge winds apply to east-west oriented gates. Every sliding gate we install in Five Corners gets posts set to 42 inches minimum with drainage gravel and a concrete collar reinforced with rebar. The clay here will heave a standard 24-inch footing within one wet season. We’ve seen it dozens of times.
We installed a heavy-duty sliding gate on a detached workshop off NE 112th Avenue, where the homeowner needed an opener rated for a 600-lb oak and steel gate. We dug footings to 42 inches to bypass the reactive clay, poured concrete with a drainage sock, and set the track on a steel-reinforced slab. The job took one full day, including a LiftMaster pneumatic vehicle detector for hands-free entry. That gate has been through three winters without a callback.
Security Gate Installation
Five Corners properties with long setbacks, wooded lots, or secondary structures often need more than a decorative barrier. We install security gates with keypad entry, telephone entry systems, and loop detectors for hands-free operation. The security gates we recommend for Five Corners are built with heavier gauge steel and hardware rated for continuous cycling, because a gate that opens six times a day wears differently than one that opens twice. We also spec openers with higher wind-load ratings, since the Columbia River corridor delivers gusts that standard residential hardware wasn’t designed to absorb.
Double Gate Installation
Double swing gates remain common on the older ranch and split-level homes throughout 98662, many with original openings too wide for a single panel. We build double gates with adjustable center latches and drop rods that compensate for the seasonal plumb shift that Five Corners clay guarantees. If your existing double gate sags on the latch side by spring, that’s not normal wear. That’s a post-heave problem, and we address it in the footing before we hang a single hinge.
Driveway Gate Installation
From simple ranch-style swing gates to automated estate entries, we install driveway gates that match the architecture of Five Corners homes without fighting the site conditions. We stock ornamental iron, cedar, and vinyl systems, and we weld custom steel frames on site when a standard catalog gate won’t fit an out-of-square opening. Every driveway gate installation includes a post-setting plan specific to your soil conditions, not a one-size-fits-all spec sheet.
Pedestrian Gate Installation
We install matching pedestrian gates alongside driveway systems or as standalone backyard and side-yard entries. Even a simple 4-foot pedestrian gate will bind and latch-fail in Five Corners if the post isn’t set below the frost line in drained concrete. We treat pedestrian gates with the same footing discipline as our heaviest automated systems.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Five Corners
Ironworks Gate Co. is trained and equipped on nine major automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Five Corners installations, we most often recommend Viking and DoorKing openers for heavy-duty sliding and swing applications where wind load and cycle frequency demand commercial-grade reliability. Ghost Controls offers excellent value for lighter residential swing gates on well-drained sites. We stock common parts for all nine brands in our Clark County warehouse, so a failed component doesn’t turn into a two-week wait. Most repairs and adjustments are completed on the first visit.
Common Gate Installation Problems We See in Five Corners Homes
- Posts set in standard 24-inch footings heave after the first winter rain. The reactive clay in Five Corners swells with moisture and lifts shallow posts, throwing gates out of plumb by spring. We see this pattern so often in the older neighborhoods off NE Fourth Plain that we can diagnose it before touching the gate.
- Standard-duty openers fail prematurely under Gorge wind load. East-west oriented gates catch the full force of Columbia River corridor gusts, and residential-grade openers rated for calm climates burn out their motors or strip their gears. We spec higher-torque models with wind-load ratings matched to your gate’s exposure.
- Wood gate frames warp and bind during the prolonged wet season. Five Corners’s 40 inches of annual rainfall keeps wood saturated from November through April. Gates built with untreated stock or unsealed end-grain absorb moisture unevenly, twist in their frames, and refuse to latch by February.
- Drainage-neglected footings recreate the same heave problem every three to five years. Even some “professional” installations skip the drainage gravel or use shallow sonotubes that act as bathtubs in clay soil. We backfill with 3/4-inch drain rock and install weep systems on sites with poor surface drainage.
Pricing for Gate Installation in Five Corners, WA
| Gate Type | Typical Range in Five Corners |
|---|---|
| Single pedestrian gate (manual) | $2,800-$4,200 |
| Single swing driveway gate (automated) | $4,500-$6,800 |
| Double swing driveway gate (automated) | $5,200-$7,800 |
| Sliding gate (automated, standard residential) | $5,800-$8,500 |
| Heavy-duty sliding gate (security/estate) | $8,000-$12,500 |
| Post reset/replacement (per post, clay mitigation) | $450-$750 |
These ranges reflect the additional footing work that Five Corners clay demands. A gate installed in sandy soil elsewhere in Clark County might cost 15-20% less upfront, but it will cost more later when the posts heave. We don’t cut that corner. Our quotes include the full footing specification, hardware, automation if requested, and haul-away of your old gate. We offer a free written estimate with no obligation, and our $89 Seasonal Tune-Up can catch post-shift before it ruins your gate’s alignment. Seniors and veterans receive a permanent 5% discount.
We Also Serve Cities Near Five Corners
Ironworks Gate Co. installs and repairs gates throughout Clark County, including Five Corners and the neighboring communities of Barberton, Walnut Grove, Mount Vista, and Salmon Creek. The clay soil and Gorge wind conditions that define Five Corners extend in varying degrees to these nearby areas, and we apply the same footing and hardware standards wherever we work.
Serving Five Corners, WA - Our Local Coverage Area
We’re based in the Five Corners area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Five Corners
The clay soil in Five Corners swells dramatically as winter rains saturate the ground, lifting fence and gate posts that weren’t set deep enough or drained properly. By February, that same clay begins to contract during dry spells, but rarely returns the post to its original position. A gate that swung freely in October is now binding against its frame or dragging at the latch. If your gate sticks only during December through March, the problem is almost certainly post heave, not hinge wear. Call (833) 754-7503 and we’ll assess whether the posts can be reset with proper drainage or need complete replacement.
For long driveways with heavy gates in Five Corners, we most often recommend Viking or DoorKing openers with higher torque ratings and wind-load resistance. These units handle the 600-lb gates common on workshop and estate properties, and they withstand the lateral stress from Gorge winds better than standard residential models. For lighter applications, Ghost Controls offers reliable performance at a lower price point. We’ll match the opener to your gate weight, cycle frequency, and exposure. Call (833) 754-7503 for a free estimate - we’ll spec the right unit for your driveway.
We set gate posts to 42 inches minimum in Five Corners, with a 12-inch diameter footing, drainage gravel backfill, and concrete reinforced with rebar on heavy or automated gates. Standard 24-inch footings fail here within one wet season. The extra depth gets below the active clay layer that swells and shrinks, and the drainage system prevents water from pooling around the concrete collar. This specification adds labor and material cost upfront, but it eliminates the reset cycle that cheaper installations require every few years.
No. A double gate that sags on the latch side is a post-heave problem, not normal wear. In Five Corners, the reactive clay lifts the latch-side post higher than the hinge-side post, creating a visible droop that worsens through winter and may improve slightly in summer without ever fully correcting. Adjusting the hinges or latch won’t fix it for long. The permanent solution is resetting the post at proper depth with drainage, then re-hanging the gate square. We’ve corrected this exact issue on dozens of homes east of Andresen Road and throughout the NE Fourth Plain corridor.
Yes. Sliding gates are ideal for detached workshops and secondary structures in Five Corners, especially where a swing gate would require too much interior clearance or where security demands controlled access. We spec heavy-duty track systems and openers rated for the gate weight, with footings engineered for the clay soil conditions. Our installation off NE 112th Avenue included a LiftMaster pneumatic vehicle detector for hands-free entry, and the system has operated without callback through multiple winter heave cycles. Call (833) 754-7503 to discuss your shop access needs - estimates are free.
Ready to get your gate installed right in Five Corners? Call Ironworks Gate Co. at (833) 754-7503 for a free, no-obligation estimate. We’ll review your site conditions, recommend the right gate and automation for your needs, and give you an upfront price with no surprises on the bill. Our 90-Day Done Right Promise covers every installation, and a live person answers the phone 24 hours a day, 7 days a week.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Five Corners and Clark County since 1984.