Fast, Reliable Gate Installation Across Edmond
Gate installation in Edmond typically runs $2,800-$7,500 for a standard residential driveway gate with operator, and most projects are completed in one to two days. We answer calls live 24 hours a day at (833) 754-7503, and our technicians are usually on-site in Edmond within the same day or next morning.
We’ve been installing gates in Edmond long enough to know the difference between a northwest 73012 subdivision built during the 2005 boom and the older ranch properties off Route 66 near 73003. The ironwork is different. The soil is different. The way a gate fails after an Oklahoma ice storm is different. That’s why homeowners here call us instead of a general handyman who also paints fences and cleans gutters. Our Gate Installation team handles nothing but gates, from wrought-iron driveway entries to tight-clearance sliding systems for alley-load townhomes. We show up when we say, price the job upfront before turning a single bolt, and back every installation with our written 90-Day Done Right Promise.
Why Ironworks Gate Co. Is Edmond’s Preferred Gate Installation Company
Edmond homeowners remember the last contractor who let them down. We don’t give them a reason to remember us that way. Over 42 years in this trade, founded in 1984, we’ve built our name on showing up, doing the work correctly, and standing behind it without paperwork or argument. That is the Keystone Standard.
Our technicians are background-checked, uniformed, and trained on nine automation brands: Linear, Viking, Ghost Controls, DoorKing, and five others. When your gate operator fails, we don’t guess. We diagnose and fix it on the first visit, whatever brand is on your driveway. Most jobs finish in a single visit.
Live phone support matters to Edmond customers, especially when a gate is stuck open at 10 p.m. or before a holiday weekend. A real person answers our line 24 hours a day, 7 days a week. No voicemail tree. No callback queue. No waiting until Monday.
Our standing offers include $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount. The price we quote is the price you pay. A square deal, plain and simple.
Our Gate Installation Services in Edmond
Swing Gate Installation
Swing gates remain the most common style across Edmond’s established neighborhoods, from the custom homes near Hafer Park to the gated entries off Covell Road in 73012. We install single and double swing configurations, always accounting for your driveway slope and the setback from the street. In northwest Edmond, where many ornamental iron swing gates from the mid-2000s are now failing simultaneously, we often recommend Gate Repair in Edmond that replaces the entire operator-and-hinge assembly rather than patching one component at a time. That saves a second service call six months later. Our installations include proper post-depth calculations for Edmond’s expansive red clay soil, which heaves and settles more than most homeowners expect.
Sliding Gate Installation
Sliding gates solve the clearance problems that plague Edmond’s narrower driveways and alley-load townhomes, particularly in the denser pockets of 73012 and 73013 where a swinging leaf would block the sidewalk or a neighbor’s garage. We measure your run, grade the track bed precisely, and spec operators with enough torque for Oklahoma wind loads. A sliding gate needs level ground and a clean track - we don’t install them where they won’t work reliably. If your property has the space for a slide, it’s often the smarter long-term choice for tight Edmond lots. We stock track hardware and v-groove wheels locally for fast turnaround when repairs are needed.
Security Gate Installation
Edmond’s gated communities and private driveways demand more than a pretty fence with a latch. We install security gates with Edmond Gate Access Control including rolling-code remote access, keypad entry, and telephone-entry systems integrated to your existing home automation. For the concentration of gated subdivisions in 73012 and 73025, where identical equipment was installed by the same regional fabricators during the building boom, we carry replacement parts and programming tools for the specific brands that were spec’d at the time - LiftMaster, DoorKing, Linear, and others. Security means your gate closes every time, locks properly, and can’t be opened with a captured code. We program and test every system before we leave.
Pedestrian Gate Installation
A pedestrian gate alongside your driveway entry adds controlled foot access without opening the full vehicle gate for every visitor. In Edmond’s larger custom homes, especially near Arcadia Lake and in the northwest corridor, we regularly install matching walk-through gates that integrate with the same access control system - one keypad or remote app for both. This is practical security, not an afterthought. We match the ironwork, powder-coat finish, and hinge hardware to your existing gate so the pair looks like it was planned together from the start.
Driveway Gate Installation
The full driveway gate is our core work. We handle everything from post-setting and concrete work to automation, safety loops, and final programming. In Edmond, where the 1995-2015 building stock includes thousands of ornamental iron gates now aging into their first replacement cycle, we often remove a failed original and install a new gate engineered for modern operators and local weather loads. We don’t subcontract the Gate Parts & Welding in Edmond or the electrical. Our crew does both, which means one responsible party and no finger-pointing if something needs adjustment.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Edmond
We are certified and equipped to service nine major gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Edmond customers, this means we don’t order parts from Dallas and make you wait a week. We stock common operator components, logic boards, and safety hardware for the brands most frequently installed in this market. Linear and Viking operators appear often in Edmond’s 2000s-era gated communities; Ghost Controls and DoorKing are increasingly spec’d for new installations and retrofits. When we quote your job, we specify the brand and model, not “a comparable unit.” You know exactly what you’re getting.
Common Gate Installation Problems We See in Edmond Homes
- Ice storm damage to ornamental iron panels. Oklahoma’s ice storms load decorative scrollwork and pickets with weight the original fabricator never calculated. We’ve replaced weld joints and entire gate sections in northwest Edmond subdivisions after storms snapped 20-year-old ironwork that was never meant to carry 200 pounds of frozen accumulation.
- Gate post heave from freeze-thaw cycles in red clay. Edmond’s expansive clay soil swells when wet and shrinks when dry, tilting posts and misaligning latch strikes. We set posts deeper than code minimum and use concrete collars engineered for this soil type, especially critical for swing gates where a quarter-inch of post lean translates to an inch of latch misalignment.
- Summer heat degradation of operator electronics. Sustained triple-digit temperatures cook circuit boards and brittle wiring insulation in tight enclosures. We spec operators with higher temperature ratings for Edmond’s south- and west-facing gates, and we ensure adequate ventilation in the housing - a detail that costs nothing extra but prevents mid-July failures.
- Simultaneous equipment failures in boom-era subdivisions. In northwest ZIPs 73012 and 73025, thousands of gates installed by the same builders with the same operators are failing within months of each other. We recently replaced a malfunctioning LiftMaster operator on a double swing gate in the gated Autumn Ridge subdivision (73012) where the original 2005 logic board finally failed after a summer heatwave. The homeowner’s neighbor, with an identical gate from the same builder, called us the next day with the same issue. We keep common replacement kits stocked for exactly this pattern.
Pricing for Gate Installation in Edmond, OK
These are real ranges for Edmond’s market, based on gates we’ve installed across 73003, 73012, 73013, and 73083:
| Gate Type | Typical Range | Includes |
|---|---|---|
| Single swing gate, manual | $2,800-$4,200 | Gate, posts, hardware, basic latch |
| Single swing gate with operator | $4,500-$6,800 | Gate, posts, operator, remote, safety loops |
| Double swing gate with operator | $6,200-$9,500 | Dual gates, posts, dual operator or master/slave, remotes |
| Sliding gate with operator | $5,800-$8,500 | Gate, track, rollers, operator, remote |
| Pedestrian gate (standalone) | $1,800-$3,200 | Gate, posts, latch or lock |
| Security access control add-on | $800-$2,400 | Keypad, telephone entry, or rolling-code receiver |
What moves you within these ranges: iron gauge and ornamentation, driveway length and grade, existing post condition, electrical run distance, and whether we need to remove a failed gate first. We inspect, measure, and quote before any work begins. Estimates are free. Call (833) 754-7503 to schedule.
We Also Serve Cities Near Edmond
Our service area extends to Edmond and the surrounding communities: The Village, Oklahoma City, Guthrie, and Warr Acres. Same live phone support, same written guarantee, same-day or next-day response throughout the northern OKC metro.
Serving Edmond, OK - Our Local Coverage Area
We’re based in the Edmond area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Edmond
Yes. Sliding gates are our recommended solution for alley-load and narrow-driveway properties in 73012 and 73013 where a swing gate would block pedestrian walkways or neighboring garage access. We measure your available run, check grade and drainage, and spec a cantilever or track-mounted slide that clears your opening without encroaching on shared space. Call (833) 754-7503 for a free site measurement and exact quote.
Usually just the operator and any damaged hinge or weld points, not the gate itself. A well-built ornamental iron gate from the 2003 era has decades of structural life left; the operator and safety hardware are what age out. We inspect the ironwork for crack propagation, check post plumb, and quote operator replacement with modern safety features. If the gate panel itself is compromised, we’ll tell you straight. Call (833) 754-7503 for a free assessment - estimates are free, and we offer a free second opinion on any written estimate you’ve already received.
Yes. We program and supply rolling-code (CodeDodger, Security+ 2.0, and compatible protocols) for all major brands including Linear, DoorKing, and LiftMaster. Rolling-code remotes change their transmission code with every use, preventing code-capture theft. For Edmond’s gated communities with multiple homes on identical legacy systems, we can upgrade the community entry or your private gate to current encryption standards without replacing the entire operator. Call (833) 754-7503 to discuss your specific system.
Yes. We excavate, re-plumb posts in concrete engineered for Edmond’s expansive clay, and install your new swing gate with proper clearance and latch alignment. Post heave is one of the most common issues we see after Oklahoma winters, and simply shimming the gate leaves the underlying problem unaddressed. We fix the foundation, then hang the gate correctly. Same-day or next-day service is available; call (833) 754-7503.
We can integrate pedestrian gates with shared access control - one keypad or remote app operating both gates - though pedestrian gates typically use a separate, smaller operator or a mechanical lock depending on usage frequency. We match the ironwork and finish to your existing driveway gate for a unified appearance. Integration is standard in our design process for Edmond’s larger properties and estate entries. Call (833) 754-7503 to schedule a free estimate and review your access options.
Ready to get started? Call Ironworks Gate Co. at (833) 754-7503 for a free, no-obligation estimate on gate installation in Edmond. A live person will answer, 24 hours a day. We’ll schedule a site visit, measure your opening, and give you an upfront price in writing. Done right - and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Edmond and the OKC metro since 1984.