Ghost Controls Gate Repair in Plano, CA | Ironworks Gate Co.
We provide independent Ghost Controls gate repair in Plano and retrofit service across the city’s residential communities and HOA-governed entrances, with same-day response for most calls. Our Plano work is shaped by one thing you won’t find in a generic manual: the seasonal heave of North Texas black clay soil, which racks gate frames out of plumb and burns through swing-arm motors faster than in any market Ghost Controls originally designed for. If your Ghost Controls operator is stopping mid-cycle, grinding, or dead after a power outage, call us at (833) 754-7503 for a free estimate and upfront price before we turn a single bolt.
Why Plano Residents Choose Us for Ghost Controls Service
We’ve been working gates in this region since 1984, and Ghost Controls has been in our toolkit for well over a decade. Victor Salinas, our owner, grew up in Boyle Heights watching a neighbor weld wrought-iron fences, then trained in welding and metal fabrication at Los Angeles Trade-Technical College before spending years on gates and operators across the LA basin. That background matters in Plano because the ornamental iron and steel automated gates here, especially in the master-planned communities off Legacy Drive and near Willow Bend, demand both electrical troubleshooting and honest metalwork when clay-soil heave pulls a frame off its posts.
We’re not a Ghost Controls dealer or authorized representative. We’re independent technicians who have diagnosed, repaired, and retrofitted hundreds of their operators across Plano’s HOAs and residential estates, rebuilding worn swing-arm mechanisms and reprogramming logic boards from the late-1990s era through today’s WiFi-enabled models. We carry Ghost Controls sales & service parts in our Plano-stocked inventory, including OEM replacement motors, control boards, and sensors, plus quality aftermarket battery backups when OEM lead times stretch too long. Our technicians are background-checked, uniformed, and guided by our K.E.Y.S. values code: Krafted right, Every time, Your home first, Standing behind it. Every job carries our written 90-Day Done Right Promise, no paperwork, no arguing.
A live person answers our phone 24 hours a day, 7 days a week. Not a voicemail tree. Not a callback queue.
Common Ghost Controls Gate Repair Problems We Solve in Plano
- Swing-arm motor burnout in TSS1/TSS2 units. Plano’s HOA entry gates cycle hundreds of times daily, and the TSS1/TSS2 motors weren’t built for continuous duty. Add voltage drops during summer A/C peaks when half of Collin County is drawing power, and you get overheated windings and seized gears. We replace with OEM motors rated for the actual load, or upgrade to heavier-duty units when the traffic count demands it.
- Photocell sensor misalignment in DSS1 sliding gate operators. Plano’s expansive black clay soil swells in wet springs and shrinks in summer drought, shifting gate tracks even a quarter inch out of level. That tiny movement throws off photocell alignment, and the DSS1 thinks there’s an obstruction. We realign the track, reset the sensors, and anchor the posts properly so it stays fixed.
- Logic board corrosion in TSS3 models. North Texas spring rains hit hard, and humidity gets trapped inside supposedly weatherproof housings. We’ve opened TSS3 control boxes in Plano with green-tinged board traces that failed silently. We clean, seal, and replace with conformal-coated boards when needed.
- Battery backup failure across all models. Plano’s summer heat degrades lead-acid batteries faster than cooler climates, and when the power goes out, your gate goes dead. This isn’t just inconvenient; Plano’s City Ordinance No. 2020-5-12 requires battery backup for code compliance. We install dual-battery systems that handle both the heat and the inspector.
- Gate sag and latch misalignment from post heave. This is the root cause behind half the “my gate won’t close” calls we get in Plano. The clay soil moves the post, the frame racks, and suddenly the Ghost Controls operator is fighting geometry it wasn’t designed for. We correct the post first, then tune the operator. Otherwise you’re paying twice.
Ghost Controls Service in Plano: What Local Conditions Mean for Your Equipment
Plano sits on some of the most aggressive expansive clay soil in Texas, and that single fact changes how we approach every Ghost Controls repair here. In a stable-soil market, a swing-arm operator installation might last fifteen years with basic maintenance. In Plano, we’ve seen properly installed TSS1 units burn through motors in four years because clay heave pulled the gate frame out of square, forcing the motor to strain through every cycle. The east-side ZIPs, 75074 and 75075, with their older 1980s wood-framed construction, show this in cedar privacy-fence swing gates that rack and bind. But the real concentration of our Plano work is west of the tollway, in the 75093 and 75024 corridors near Willow Bend and Legacy Drive, where the 1990s-2000s master-planned boom left one of the densest clusters of HOA-governed automated ornamental iron entry gates in Collin County. Those systems are now 20-25 years old and hitting replacement cycle simultaneously. The HOAs deferred maintenance through the 2010s, and now they’re facing multiple unit failures at once, often with strict community aesthetic standards that prohibit visible changes to brick-and-mortar pilaster columns. Knowing how to retrofit a modern Ghost Controls operator onto legacy masonry hardware without full column demolition, that’s a skill we developed specifically for this Plano market. At the iron gate entrance to the Willow Bend Townhomes off Park Boulevard, we replaced a pair of Ghost Controls TSS1 swing-arm operators that had seized from gear wear. The HOA board had three failed repair attempts from other companies, so we installed new TSS1 arms, realigned the gate frame on its brick pilasters (post-heave correction using helical anchors), and added a dual-battery backup system to meet city code. The gates now cycle smoothly and pass inspection.
A gate should open when you need it to and stay closed when you don’t. Everything else is just the work.
Ghost Controls Models & Products We Service in Plano
We service the full current Ghost Controls residential and light-commercial line: the TSS1 and TSS2 single and dual swing-arm operators, the DSS1 sliding gate operator, and the TSS3 heavy-duty swing system. Our Plano service vehicles carry OEM Ghost Controls replacement motors, control boards, limit switches, and safety sensors for same-day repair on most calls. For battery backups and photocells, we stock both OEM and quality aftermarket options, but we always recommend full OEM for load-bearing drive components. An aftermarket swing-arm gear assembly might save forty dollars today and cost you a full replacement in two Plano summers when it strips under heat-expanded load. We also handle motor installation in Plano, battery backup upgrades, and gate realignment as standalone services, whether your Ghost Controls operator is new or twenty years old.
Ghost Controls Service Pricing in Plano
Most Ghost Controls repairs in Plano fall between $180 and $450, depending on what’s actually failed. A photocell realignment or limit switch adjustment runs toward the lower end. OEM motor replacement, logic board swap, or full battery backup installation with dual-battery configuration runs higher. Track realignment and post-heave correction add labor but prevent repeat calls. We settle on an upfront price before we start, and we don’t add surprise charges when the job runs long. Our $89 Seasonal Tune-Up catches most problems before they strand you. Repairs over $250 qualify for $50 off. Seniors and veterans receive 5% off, always. For an exact quote on your Ghost Controls gate, call (833) 754-7503. Estimates are free, and a live person will answer.
Serving Plano, CA - Our Local Coverage Area
We’re based in our Plano service area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Ghost Controls Gate Repair in Plano
It’s usually neither, at first. In Plano, clay-soil heave pulls the gate frame out of plumb, and the TSS1’s limit switches hit false positions or the motor stalls against mechanical binding. We check frame squareness first, then test the motor amp draw and sensor alignment. The real fix is correcting the post, not just replacing parts. Call (833) 754-7503 for a free diagnostic - we’ll tell you exactly what it needs.
Yes, in most Plano installations. The DSS1 mounts to a concrete pad independent of the track, so a newer Ghost Controls sliding operator or compatible upgrade often bolts to the same footprint. We verify track gauge, gate weight, and cycle count first. If clay heave has shifted the track, we realign that too, or the new unit will fail the same way. Call (833) 754-7503 to schedule an evaluation.
Replace, in most cases. The TSS1 and early TSS2 units from that era use motor and gear technology that can’t handle modern cycle counts, and parts availability is narrowing. We specialize in retrofitting new operators onto existing Legacy Drive masonry columns without visible changes, preserving HOA aesthetic compliance. We also bring every installation up to Plano’s battery-backup code requirement. Call (833) 754-7503 for a board presentation quote.
We work directly with property managers and HOA boards, documenting every specification before we order parts. Our retrofits reuse existing mounting hardware and column covers where possible, and we photograph pre- and post-condition for board records. We’ve passed every Plano inspection we’ve submitted. The 90-Day Done Right Promise applies to HOA work exactly as it does to private homes.
Ghost Controls sells OEM battery backup kits for the TSS1, TSS2, and TSS3 lines, but Plano’s City Ordinance No. 2020-5-12 requires secondary manual release capability too. We install dual-battery systems with manual release hardware that exceeds code minimum, because a single battery in August Texas heat is a near-guarantee of failure. Call (833) 754-7503 to verify your system meets current code.
Service Areas Near Plano
We cover Plano service area ZIPs 75026, 75074, 75075, and 75086, plus surrounding communities. Our Ghost Controls service extends to Ghost Controls service in Irving and Ghost Controls service in Frisco, as well as Los Angeles, San Jose, San Francisco, Sacramento, Fresno, and Long Beach. Same-day scheduling depends on call volume and parts availability, but a live person answers 24 hours a day to book your slot.
Book Your Ghost Controls Service in Plano Today
Call (833) 754-7503 now. A live person will answer, day or night, and we’ll get a technician to your Plano property with the right Ghost Controls parts and the honest assessment you need. Most repairs complete in one visit. Every job is backed by our written 90-Day Done Right Promise. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Plano since 1984.