Gate Repair Services in Aloha, OR
Gate repair in Aloha typically costs between $180 and $550 depending on whether the issue is a simple hinge replacement or a full automation system rebuild, and most repairs are completed in a single visit with upfront pricing agreed before work begins. Ironworks Gate Co. has been serving Aloha since 2013, and we answer our phones live 24 hours a day, 7 days a week at (833) 754-7503. We also offer Gate Access Control in Aloha. If your gate is sagging, grinding, or stopped working entirely, we’ll give you a straight answer on whether it can be fixed and what it will cost.
We know the difference between Aloha proper and the Beaverton-address parcels that are actually unincorporated Washington County. That distinction matters when permits are involved, and it matters when you’re trying to get a contractor who actually shows up. Our trucks run the full 97003 ZIP code, from the older ranches along 185th Avenue to the split-levels tucked behind the Aloha Hub Shopping Center, and we’re Bethany service area adjacent.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Aloha Homeowners Choose Ironworks Gate Co.
We’ve built our reputation in Aloha one job at a time, mostly through neighbors telling neighbors. The 1970s and 1980s homes near Cooper Mountain and the streets west of TV Highway have kept us busy with cedar gates that were hung when Gerald Ford was president and simply weren’t built to survive five decades of Tualatin Valley moisture.
Our technicians are background-checked, uniformed, and trained on nine gate-automation brands including Viking, Ghost Controls, and DoorKing. We don’t send a handyman with a toolbox. We send a gate specialist who carries the right hinges, Aloha Gate Parts & Welding gear, and the right control board for whatever is on your driveway. Most repairs finish in one visit because our trucks are stocked for it.
Every job carries our 90-Day Done Right Promise - written, no paperwork, no arguing. If something isn’t right, we come back and make it right. That’s been our Keystone Standard since 1984, and it applies to the $180 hinge job on a Cooper Mountain ranch gate the same as it does to a full automation rebuild on an estate driveway near the Nike campus.
Aloha residents also appreciate that a live person answers our phone around the clock. Not a voicemail tree. Not an answering service that promises a callback Monday. When your gate won’t close at 9 p.m. and you’re leaving town in the morning, you talk to someone who can actually dispatch help.
Gate Repair Services We Offer in Aloha
Gate Repair
We fix sagging swing gates, seized rolling gates, broken welds, and posts that have heaved out of the wet Aloha soil. Our welders repair steel and aluminum frames on-site, and we carry replacement hardware sized for the heavier cedar gates common in 97003 neighborhoods.
Learn more about our Gate Repair in Aloha.
Gate Installation
New gate installation in Aloha requires navigating Washington County’s Land Use & Transportation department, not Beaverton’s building division. We handle that permitting path as part of our standard process, which saves homeowners the confusion that trips up less experienced contractors. We install wood, steel, aluminum, and composite gates matched to your existing fence line and slope.
Learn more about our Gate Installation in Aloha.
Gate Motor & Opener
We are certified to service and install nine major automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Whether your opener is clicking but not moving, or you need a new system rated for the weight of a solid cedar gate, we diagnose and fix it on the first visit.
Learn more about our Gate Motor & Opener in Aloha.
Gate Access Control
Keypads, remotes, intercoms, and smartphone-enabled entry systems for Aloha homeowners who want convenience without compromising security. We program and repair all major brands, and we can upgrade older systems to modern standards without replacing the gate itself.
Learn more about our Gate Access Control in Aloha.
Gate Parts & Welding
Custom welding for broken frames, hinge rebuilds, and structural reinforcement of gates that have taken a hit from a delivery truck or simply succumbed to decades of rust. We match existing styles so the repair disappears into the gate.
Learn more about our Gate Parts & Welding in Aloha.
Neighborhoods We Serve in Aloha
Our trucks are on the road across 97003 every day, serving Rockcreek, OR and surrounding areas. Most calls receive same-day or next-day response.
- Cooper Mountain - older ranches with original cedar gates now reaching end of life
- Stewart Meadows - 1980s split-levels with typical privacy-fence gate setups
- Aloha Hub area - commercial and mixed residential with heavier-duty security gates
- Reedville - post-war and mid-century homes with varied gate configurations
- West TV Highway corridor - dense 1970s tracts with uniform 6-foot board-on-board fences
Why Aloha’s Climate & Housing Affect Gate Repair
Aloha sits on the Tualatin Valley floor, and that geography creates specific problems for gates that contractors from drier climates rarely anticipate. The valley collects roughly 37 to 40 inches of annual rainfall, and the wet season stretches from October well into May. That sustained moisture doesn’t just rot cedar posts - it oxidizes uncoated steel hinges and latches that looked fine in September and are frozen solid by February.
The housing stock compounds the issue. Aloha built out rapidly from the mid-1970s through the 1990s as a Washington County bedroom community, producing thousands of ranch and split-level homes on standard lots, nearly all fitted with 6-foot cedar board-on-board privacy fences and wood swing gates. Those gates were built to a 20-to-30-year lifespan, and most are now 30 to 50 years old. We see the same patterns repeatedly: posts heaved by winter saturation, bottom rails rotted where sprinkler systems keep soil constantly damp, hinge hardware that has rusted through its mounting plates, and lightweight hollow-tube metal frames bent by ice storm loads that wouldn’t have damaged heavier material.
The periodic Portland-metro ice storms hit Aloha harder than higher-elevation west-side neighborhoods because cold air pools in the valley. The freeze-thaw cycle splits weathered wood rails and torques gate frames out of square. We’ve replaced entire gate systems after the 2021 ice storm that simply couldn’t be realigned. When we repair or replace a gate in Aloha, we specify hardware and materials rated for these conditions - not the cheapest option, but the one that will still be working when the next ice storm arrives.
Pricing for Gate Repair in Aloha
We settle on an upfront price before turning a single bolt. No surprises on the bill.
| Service | Typical Range |
|---|---|
| Hinge replacement (single) | $180 - $260 |
| Post reset or reinforcement | $280 - $450 |
| Gate motor diagnostic & repair | $220 - $380 |
| Automation control board replacement | $340 - $550 |
| Custom welding / frame repair | $250 - $480 |
| Full gate replacement (wood, standard size) | $1,400 - $2,800 |
Standing offers for Aloha homeowners: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount. Call (833) 754-7503 for an exact quote - estimates are free.
Service Area - Cities Near Aloha
We run regular routes through home base and out to neighboring communities including Rockcreek, Bethany, Cedar Mill, and Oak Hills. If you’re near the Aloha border and aren’t sure whether you’re in our primary zone, call us - we likely know your street.
Serving Aloha, OR - Our Local Coverage Area
We’re based in the Aloha area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Aloha
Simple repairs like hinge replacement or motor service do not require permits, but full gate replacement or new installation does - and because Aloha is unincorporated Washington County, permits flow through Washington County’s Land Use & Transportation department, not Beaverton’s building division. We handle this permitting path as part of our standard installation process. Call (833) 754-7503 and we’ll confirm exactly what your project requires.
Most sagging gate repairs in Aloha run between $180 and $380, depending on whether the issue is a failed hinge, a rotted post, or a frame that has twisted out of square. Cedar gates from the 1970s and 1980s often need post reinforcement because the original posts were set without proper drainage in clay-heavy soil. We’ll give you an exact price before starting - call (833) 754-7503 for a free estimate.
Most gate motor repairs in Aloha are completed in a single visit because our trucks carry diagnostic equipment and replacement parts for nine major brands including Viking, Ghost Controls, and DoorKing. If your opener is a brand we service and the failure is mechanical or electrical rather than structural, we typically finish within two hours. Call (833) 754-7503 - we answer live 24/7.
Repair is usually the better value if the frame is sound and the gate is less than 25 years old; replacement makes more sense when we find rot in multiple rails, posts that have heaved beyond stabilization, or hardware that is no longer manufactured. For Aloha’s 1970s-1990s cedar gates, we often find that a thorough repair plus hardware upgrade extends life by another decade at roughly one-third the cost of replacement. We’ll tell you straight which path saves money long-term - call (833) 754-7503 for an assessment.
The combination of Tualatin Valley moisture, clay-heavy soil that holds water against posts, and the original 6-foot cedar privacy gates now reaching 30 to 50 years of age creates a perfect storm for accelerated failure. Aloha’s lower elevation also means harder freeze-thaw cycles during ice storms. We specify materials and hardware rated for these exact conditions. Call (833) 754-7503 and we’ll show you what a gate built for Aloha weather looks like.
Written by the team at Ironworks Gate Co., serving Aloha since 2013.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 1-hour.
- 4You approve before work beginsNothing starts until you say go.
What Los Angeles Customers Say
"Showed up fast, fixed it right the first time, and the price matched the quote. Couldn't ask for more."
- Verified local homeowner"Professional from the first call. Explained everything clearly and left the area spotless."
- Verified local homeowner"Called in the morning, problem solved by afternoon. Honest, upfront pricing - highly recommend."
- Verified local homeowner