Trusted Gate Installation for Los Angeles Homeowners
A new gate installation in Los Angeles typically costs between $2,800 and $8,500 depending on size, material, and automation, with most residential driveway gates completed in one to three days. Ironworks Gate Co. has installed gates across Los Angeles since 1984, and we answer our phone live at (833) 754-7503, 24 hours a day, 7 days a week.
Los Angeles homeowners know the difference between a gate that looks right and one that works right. After 42 years in this trade, we’ve seen what happens when a gate is hung without accounting for the hillside settling in the Hollywood Hills, or when a motor is spec’d for flatland but installed on a graded driveway in the Pacific Palisades. We don’t guess. We measure twice, weld once, and back every installation with our written 90-Day Done Right Promise. No paperwork to file, no argument to have. If it’s not right, we come back and make it right.
Most of our Los Angeles installations are finished in a single visit once materials arrive, with upfront pricing settled before we turn a single bolt. You’ll know the full cost before we start, and that number won’t change. We’re not the cheapest bid you’ll find, and we don’t try to be. We’re the last call you’ll need to make.
What Our Gate Installation Service Includes
Driveway Gate Installation
A Driveway Gate is the main entry point for vehicles, and in Los Angeles it needs to handle daily use, sun exposure, and occasional Santa Ana wind gusts that can top 60 miles per hour. We install steel, aluminum, and wrought iron driveway gates with posts set to proper depth for your soil conditions, whether you’re on the clay-heavy ground of the San Fernando Valley or the sandy loam closer to the coast. Every driveway gate we install is leveled with a laser transit and hung on heavy-duty hinges rated for the gate’s exact weight, not a generic bracket from the hardware store.
Pedestrian Gate Installation
Pedestrian gates see more cycles per day than most driveway gates, and a poorly hung one sags within months. We install Pedestrian Gate systems with self-closing hinges, proper latches aligned to your fence line, and clearance calculated for the expansion that comes with August heat in neighborhoods like Woodland Hills and Northridge. If you need keypad or card reader integration, we rough in the low-voltage conduit during installation so you’re not tearing up new concrete later.
Sliding Gate Installation
Sliding gates make sense when your Los Angeles driveway slopes upward from the street or when you need to preserve every square foot of parking space. We install V-track and cantilever systems, with the choice driven by your grade, your drainage, and how much debris collects on your driveway. In hillside areas like Laurel Canyon and the Hollywood Hills, we often recommend cantilever to avoid track clogging, and we always pour a concrete pad for the operator that extends below the frost line, even though Los Angeles rarely freezes, because settling is the enemy of alignment.
Swing Gate Installation
Swing gates are the classic choice for flat driveways and for homeowners who want the clean look of a gate that opens like a door. We install both single-swing and double-swing configurations, with hydraulic or electromechanical operators matched to the gate’s width and weight. In wind-prone areas like the Santa Clarita Valley, we specify heavier posts and reinforced hinge plates so your gate doesn’t torque its own frame over time. We also set the open and close limits precisely, with safety loops or photo eyes tested before we leave.
Double Gate Installation
Double gates split the opening load across two leaves, which means lighter individual panels, less strain on the posts, and a more forgiving installation if your driveway has a slight crown. We install double gates with center stops, drop rods for manual security, and synchronized operators that prevent one leaf from racing ahead of the other. In older Los Angeles neighborhoods like Hancock Park or Los Feliz, where driveway widths were standardized decades ago, double gates often let us maximize the opening without custom fabrication.
Security Gate Installation
Security gates are built to stop unauthorized entry, not just mark a boundary. We install security gates with reinforced frames, anti-climb toppings, and integration points for access control systems, cameras, and intercoms. For Los Angeles properties in areas requiring additional perimeter security, we can spec gates rated for forced entry resistance and install them with tamper-resistant hardware. The motor and control box go inside the property line, not exposed to the sidewalk, and we always include a manual release that works from both sides in case of power failure.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Installation
We are trained and equipped on nine major gate-automation brands, and we stock OEM parts for each. On Viking operators, we’ve installed hundreds of units across Los Angeles County and keep their control boards and gear assemblies in our vans, so a failed motor doesn’t mean a two-week wait. Ghost Controls is our go-to for solar-compatible residential installations, particularly in hillside homes where running 110V to the gate would require trenching through rock. We know their battery systems and solar panel sizing by heart, and we’ve made them work in canyons where other installers said it couldn’t be done.
DoorKing remains a staple for multi-tenant and commercial-grade access control in Los Angeles, and we maintain current certifications on their telephone entry and loop detector systems. Elite operators are workhorses on heavy iron gates, and we keep their replacement gears and limit switches on hand. Whether you have one of these brands or any other make, we can help. Our technicians carry the programming tools and diagnostic software for all nine brands we support, so the correct fix happens on the first visit, whatever is on your driveway.
Signs You Need Gate Installation Right Now
- Your current gate is sagging or dragging on the ground. A gate that scrapes the driveway has already stressed its hinges beyond their design limit, and continued use will tear the posts loose from their concrete footing. In Los Angeles, where many gates are on slopes, a dragging gate also creates a trip hazard and channels water toward your foundation during rare heavy rains.
- The frame is cracked, rusted through, or visibly bent. Structural failure in a gate frame doesn’t repair well, welding on rusted thin-wall tubing is a temporary patch at best, and a compromised frame puts unpredictable loads on your operator. We’ve replaced gates in Marina del Rey and San Pedro where salt air accelerated corrosion to the point of collapse.
- You’re adding automation to a manual gate that was never designed for it. Not every gate can safely accept a motor, older lightweight gates can be torn off their posts by an operator’s torque, and retrofitting without engineering assessment risks damage and injury. We evaluate the existing structure before recommending any automation, and we’ll tell you honestly if a new installation is the smarter path.
- Your property has changed and the old gate no longer fits the need. Maybe you’ve added an ADU and need a separate pedestrian entry, or your driveway was widened and the single gate looks wrong and functions worse. A gate that’s too small for current traffic patterns gets bumped, propped open, or bypassed, defeating its purpose.
- The gate has been damaged by vehicle impact or fallen tree limbs. Even minor collisions can twist a gate frame in ways that aren’t visible until the operator starts failing or the latch won’t meet the strike. After the 2018 windstorms in the San Fernando Valley, we replaced dozens of gates that looked fine but had hidden stress fractures.
Our Gate Installation Process - Step by Step
- 1
On-site measurement and site assessment. We visit your Los Angeles property with a laser measuring device, a soil probe, and a grade level. We check underground utilities, drainage patterns, and the exact slope of your driveway. This takes 30 to 45 minutes, and we photograph everything for our project file.
- 2
Upfront proposal with no obligation. Within 24 hours, you receive a written proposal with line-item pricing for materials, labor, and automation. The price we quote is the price you pay. We don’t tack on “unforeseen conditions” later because we did the homework upfront.
- 3
Fabrication and material preparation. For custom gates, our welding shop cuts and fits the frame before it reaches your home. For standard designs, we verify that stock materials match your specifications. We never start an installation with parts that “should fit.”
- 4
Installation with post-setting and gate hanging. We dig to proper depth for your soil and gate load, pour concrete with a minimum 3,000 PSI mix, and allow cure time before hanging. Gates are leveled with a transit, not a bubble level, and operators are mounted on vibration-isolated pads.
- 5
Testing, programming, and walkthrough. We cycle the gate 50 times, test all safety devices, program your remotes and keypad codes, and show you the manual release. You sign off only when you’re satisfied, and our 90-Day Done Right Promise begins that day.
How Much Does Gate Installation Cost in Los Angeles?
A typical manual driveway gate installation in Los Angeles runs $2,800 to $4,500, while an automated single swing gate with a standard operator generally falls between $4,200 and $6,800. For more details, see our Gate Installation pricing guide. Sliding gates with track systems typically range from $5,500 to $8,500 depending on travel distance and motor size. Pedestrian gates are simpler, usually $1,800 to $3,200 for manual versions and $3,500 to $5,500 with keypad or card reader integration.
Several factors move the price within these ranges. Material is the biggest variable: steel costs more than aluminum but lasts longer in coastal air, wrought iron commands a premium for hand-forged detail work, and custom sizing always adds fabrication time. Automation adds $1,200 to $2,800 depending on brand and features, with telephone entry, loop detectors, and battery backup each adding their own line item. Site conditions matter too, a gate on a steep grade in the Hollywood Hills requires more engineering than a flat installation in the San Fernando Valley, and rock excavation or utility relocation can add labor hours.
To avoid overpaying, get at least one other written estimate and bring it to us for our Free Second Opinion. We will review their scope and pricing honestly, and if our number is higher, we’ll explain exactly what the difference covers. Our estimates are free, detailed, and delivered with no pressure to decide on the spot. Call (833) 754-7503 for an exact quote on your Los Angeles property.
Gate Installation Near Los Angeles - Our Service Area
We install gates throughout Los Angeles and the surrounding communities, from Santa Monica and Beverly Hills to Pasadena, Glendale, Burbank, and the full span of the San Fernando Valley including Woodland Hills and Santa Clarita. Typical response time for an estimate is same-day or next-day in most of Los Angeles County, and we carry the full inventory of automation parts so we’re not waiting on shipping once you approve the work. We also serve Gate Installation in San Jose, Gate Installation in San Francisco, and select other California markets from our regional offices.
Serving Los Angeles, CA - Our Local Coverage Area
We’re based in the Los Angeles area and know this community well. Use the map below to find Gate Installation near you - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Installation in Los Angeles
Gate installation is the complete process of fitting a new gate to your property’s entry point, including post setting, gate hanging, hardware alignment, and optional automation with motors, keypads, or access control systems. At Ironworks Gate Co., we handle everything from digging the post holes to programming your remotes, and we back the finished work with our written 90-Day Done Right Promise. Every installation starts with a free on-site assessment so we spec the right gate for your slope, soil, and daily use.
Most residential gate installations in Los Angeles are completed in one to three days once materials are on site, with simple manual pedestrian gates often finished in a single morning. Custom fabrication or extensive site preparation, such as rock excavation or retaining wall work, can extend the timeline, and we communicate any changes before they happen. We don’t leave your driveway open overnight unless we’ve discussed it with you and installed temporary secure closure.
Gate installation in Los Angeles typically ranges from $1,800 for a basic manual pedestrian gate to $8,500 for a large automated sliding gate with access control integration. The final price depends on material choice, gate size, automation features, and site conditions like slope or soil type. Call (833) 754-7503 for a free, itemized estimate with no obligation, and ask about our $50 off any repair over $250 if you’re replacing an existing automated system.
Yes, we are trained and equipped to install and service all four of those brands, plus five additional major manufacturers. We stock Viking control boards and gear assemblies, Ghost Controls battery and solar components, DoorKing entry systems and loop detectors, and Elite replacement gears and limit switches. Whatever brand you prefer or already have, we can source, install, and maintain it correctly.
We answer our phone live 24 hours a day, 7 days a week, and we can dispatch for urgent situations such as a gate that has been damaged and left your property unsecured. While full custom installations require normal lead times for fabrication, we carry standard gate sizes and emergency barrier solutions for same-day security closure. Call (833) 754-7503 anytime, and a live person will discuss your situation and timeline.
Every gate installation is protected by our 90-Day Done Right Promise, a written guarantee with no paperwork to file and no argument to have, if anything is not right, we return and make it right at no charge. Beyond our promise, manufacturer warranties apply to motors, control boards, and other components, with terms varying by brand. We register all warranty coverage on your behalf and keep records so you don’t have to track paperwork.
Clear the installation area of vehicles, debris, and any obstacles within ten feet of the gate line, and mark or tell us about any underground irrigation, electrical, or septic lines. We handle permits if your Los Angeles jurisdiction requires them, and we coordinate with your HOA if needed. If you’re replacing an existing gate, we remove and haul away the old one as part of our standard scope unless you prefer to keep it.
Schedule Your Gate Installation Service in Los Angeles Today
Call Ironworks Gate Co. at (833) 754-7503 for a free, no-obligation estimate on your new gate installation. A live person will answer, 24 hours a day, 7 days a week, and we’ll schedule your on-site assessment at your convenience. We’ve been serving Los Angeles homeowners since 1984, and we plan to be here for another forty years, standing behind every gate we install.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Los Angeles since 1984.