Fast, Reliable Gate Repair Across San Bruno
Gate repair in San Bruno typically runs $180-$650 depending on what’s failed, and most calls are completed in a single visit with same-day scheduling when you call before noon. We’re familiar with every corner of the 94066 ZIP, from the original post-war tracts near El Camino Real to the rebuilt homes in Crestmoor and the hillside properties off Skyline Boulevard that catch the worst of the gap winds.
We’ve been sending our Gate Repair crews up the Peninsula from our Los Angeles headquarters for over 42 years, and San Bruno is a city we know well. The San Bruno Gap doesn’t just make your commute breezy, it destroys gates. Pacific wind, salt fog, and decades-old wrought iron combine into a repair pattern we see nowhere else on the Peninsula. When your gate won’t close, drags on the driveway, or the opener just grinds, a live person answers our phone 24 hours a day, 7 days a week at (833) 754-7503. No voicemail. No callback queue.
Why Ironworks Gate Co. Is San Bruno’s Preferred Gate Repair Company
San Bruno homeowners don’t call us for flashy trucks or discount coupons. They call because their neighbor’s gate finally stopped sagging after our third visit, or because their cousin in Crestmoor mentioned we replaced a rusted operator and reinforced the frame against wind load. Our reputation here is built on showing up when we say and fixing what others patch.
We’re not the cheapest bid on the Peninsula, and we don’t try to be. We’re the last call you’ll need to make. Every job carries our 90-Day Done Right Promise, the Keystone Standard, written and plain: if it’s not right, we come back and make it right. No paperwork to file, no arguing, no exceptions. Our background-checked, uniformed technicians work under our K.E.Y.S. code, Krafted right, Every time, Your home first, Standing behind it, and that applies whether we’re resetting a single hinge on a 1960s chain-link gate or rewiring a full automation system off Crystal Springs Road.
Most San Bruno calls reach us within our standard Peninsula response window, and we stock parts for nine major automation brands so we’re not ordering components while your gate hangs open. A gate that won’t secure your property is not a Monday problem. It’s a today problem.
Our Gate Repair Services in San Bruno
Hinge Repair
Hinge bolts shear off in San Bruno faster than anywhere else we serve on the Peninsula. The gap winds create lateral torque that standard hardware wasn’t designed to absorb. We see this most on west-facing gates in the older tracts near San Bruno Avenue and on hillside installations above El Camino. Our hinge repair includes heavier-gauge bolts, reinforced mounting plates, and when the frame has started to rack, we add bracing gussets that transfer wind load back to the post. A typical hinge repair in San Bruno runs $180-$320.
Post Repair
San Bruno’s post-WWII housing stock means many original gates still hang on 70-year-old wood or poured-concrete posts that have rotted, cracked, or settled unevenly. The Crestmoor rebuilds have newer posts, but the original neighborhoods from the late 1940s through the 1970s are where we do most of our post stabilization and replacement. We replaced a rusted-out LiftMaster operator on a Crestmoor neighborhood gate that had failed after just three seasons of gap winds, reinforcing the mounting with heavier-gauge bolts and adding a nylon roller kit to handle the lateral stress. Post repair or replacement in San Bruno typically costs $280-$550 depending on depth, concrete work, and whether we’re matching existing masonry.
Weld Repair
Wrought iron gates from the 1950s and 1960s are common in San Bruno, and the salt air attacks welds at the stress points, hinges, and decorative joints. We don’t just spot-weld over cracks. Our weld repair includes grinding to clean metal, proper penetration, and post-weld rust treatment with a zinc primer that holds up in coastal exposure. Done right, a proper weld repair extends a gate’s life by years, not months. Weld repair in San Bruno runs $220-$480 for most residential gates.
Gate Realignment
A gate that drags, binds, or won’t latch is often a frame that’s racked out of square. In San Bruno, this is almost always wind-related. The gap pushes gates out of true faster than standard Peninsula installs can handle. Realignment includes resetting the frame, adjusting or replacing worn rollers, and sometimes upgrading to a nylon roller kit that handles lateral stress without corroding. Realignment work in San Bruno typically costs $200-$380.
Lock Repair
Corroded lock mechanisms are standard in coastal San Bruno. Salt fog gets inside housings, seizes cylinders, and pits strike plates until the latch won’t catch. We repair or replace mechanical and magnetic locks, and we can upgrade to marine-grade hardware on request.
Rust Treatment
Rust treatment is not cosmetic here. It’s structural maintenance. We wire-brush to bare metal, treat with rust converter, and finish with a coating system appropriate to coastal exposure. For wrought iron in San Bruno’s salt air, we recommend rust treatment every 18-24 months as preventive maintenance. A full rust treatment and coating runs $250-$450.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in San Bruno
We carry parts and factory-level training for nine gate automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For San Bruno customers, this means we don’t diagnose your Viking operator on Monday and order parts for Thursday. We stock the common failure items, motors, control boards, and safety sensors for Linear, Viking, and Ghost Controls systems locally, and our technicians travel with the diagnostic tools to program and calibrate each brand on-site. Most San Bruno automation repairs are completed in one visit.
Common Gate Repair Problems We See in San Bruno Homes
- Galvanized springs snap within 2-3 years due to salt corrosion accelerated by coastal fog. The San Bruno Gap pulls moisture inland even on clear days, and standard galvanized coating isn’t enough for this exposure.
- Hinge bolts shear off under persistent wind load, especially on west-facing gates in the Gap. The standard Peninsula install that holds fine in Burlingame will rack and sag within a season here.
- Automatic opener chains and gears grind down faster as gates struggle against gusts. The motor works harder, the chain elongates, and the limit switches drift out of calibration.
- Original wrought-iron frames crack at weld points after decades of thermal cycling and salt corrosion. These gates were built to last, but not forever, and not without maintenance in coastal air.
Pricing for Gate Repair in San Bruno, CA
We’re plain about costs because surprises on the bill are how trust breaks.
| Service | Typical Range in San Bruno |
|---|---|
| Hinge repair / replacement | $180 - $320 |
| Post repair / stabilization | $280 - $550 |
| Weld repair | $220 - $480 |
| Gate realignment | $200 - $380 |
| Lock repair / replacement | $160 - $290 |
| Rust treatment and coating | $250 - $450 |
| Automatic opener repair | $220 - $480 |
| $89 Seasonal Tune-Up | $89 (fixed) |
What moves the price: extent of corrosion damage, whether the post or frame needs structural work, automation brand and parts availability, and accessibility. We settle the full price before turning a single bolt. Our $50 Off Any Repair Over $250 applies automatically, and we offer a Free Second Opinion on Any Written Estimate if you’ve already been quoted elsewhere. Senior and Veteran customers receive 5% off, always. Call (833) 754-7503 for a free estimate.
We Also Serve Cities Near San Bruno
Our Peninsula crews regularly work in San Bruno and the surrounding communities: Millbrae to the south, South San Francisco to the north, Pacifica along the coast, and Burlingame across the 101. Each city has its own gate character, Millbrae’s more sheltered climate, Pacifica’s heavier salt exposure, Burlingame’s older estate properties, but San Bruno’s gap wind pattern is unique. We adjust our hardware specs accordingly.
Serving San Bruno, CA - Our Local Coverage Area
We’re based in the San Bruno area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in San Bruno
San Bruno’s coastal fog and salt air accelerate corrosion on galvanized springs, and the gap winds add cyclic stress that fatigues the metal faster. Springs that last 5-7 years in sheltered Millbrae often snap in 2-3 years here. We spec higher-grade coatings and can upgrade to stainless hardware on request. Call (833) 754-7503 for an exact quote, estimates are free.
Standard 3/8″ lag bolts are insufficient for west-facing gates in the San Bruno Gap. We install 1/2″ or 5/8″ heavy-gauge bolts with reinforced backing plates, and we often add bracing gussets to transfer wind load into the post. The hardware costs more than a standard install, but a gate that doesn’t rack or sag saves money within two seasons. Call (833) 754-7503 for an exact quote, estimates are free.
Yes. Older wrought iron was not coated for modern coastal exposure, and decades of fog and salt have likely thinned the metal at weld points and low spots where water collects. The good news is that these gates were overbuilt by today’s standards. With proper weld repair, rust treatment, and a maintained coating system, a 1950s San Bruno gate often outlasts a new import. Call (833) 754-7503 for an exact quote, estimates are free.
Yes. Wind damage to operators is one of our most common San Bruno calls. The motor strains against gusts, overheats, strips gears, or throws error codes. We diagnose whether the operator itself has failed or whether it’s protecting itself against a gate that’s binding due to wind-racked framing. We service nine brands including Linear, Viking, and Ghost Controls, and we carry parts for same-day repair on most calls. Call (833) 754-7503 for an exact quote, estimates are free.
Twice yearly, spring and fall. The gap winds peak in late spring and early fall, and salt corrosion is a year-round factor. Our $89 Seasonal Tune-Up includes hinge torque check, roller and track inspection, operator force testing, safety sensor alignment, and rust-spot treatment. Catching a loose hinge or a dragging roller before it fails saves the cost of an emergency call. Call (833) 754-7503 to schedule.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving San Bruno since 1984.