Fast, Reliable Gate Repair Across Burlingame
Gate repair in Burlingame typically runs $180-$650 depending on the problem, and most calls are completed same-day. Our crews are on the road throughout the 94010 and 94011 ZIP codes daily, and a live person answers the phone at (833) 754-7503 twenty-four hours a day.
We’ve been working in Burlingame long enough to know what the salt fog does here. Your gate isn’t failing early because you bought the wrong product. It’s failing early because Burlingame sits directly on San Francisco Bay, and that marine layer carries corrosive salt inland every single morning. Springs, hinges, operator chains, and circuit boards all corrode measurably faster here than they do just five miles east in San Mateo. That’s not speculation. We see it on every service call from the flatlands near Burlingame Avenue to the steep grades of Burlingame Hills.
Our Gate Repair team carries corrosion-resistant hardware as standard stock, not as an upgrade. When we quote a repair, the price is settled before we turn a single bolt. No surprises on the bill. And every job is backed by our written 90-Day Done Right Promise - the Keystone Standard we’ve applied since 1984.
Why Ironworks Gate Co. Is Burlingame’s Preferred Gate Repair Company
We’ve served Peninsula communities for over 42 years. Homeowners in Burlingame know our trucks because we’ve been fixing gates on the same streets, in the same neighborhoods, across multiple decades. We’ve worked on the original wrought-iron gates of 1920s Craftsman bungalows near El Camino Real and on automated estate systems in the hills above Skyline Boulevard.
Our reviews from Burlingame customers consistently mention two things: we show up when we say we will, and we fix it without coming back. That’s the result of our K.E.Y.S. code - Krafted right, Every time, Your home first, Standing behind it. Our technicians are background-checked, uniformed, and trained to work in your home the way they’d work in their own mother’s.
Response time to Burlingame is typically same-day for standard calls and within hours for gates stuck open or closed. We keep parts in stock for nine major automation brands - Linear, Viking, Ghost Controls, and DoorKing among them - so we don’t waste your time ordering components.
We also know the local terrain. The elevated Burlingame Hills area shifts toward larger mid-century and contemporary estates with longer driveways and automated swing or slide gate systems installed on pitched grades. That local knowledge matters when a gate is creeping open on a 12% slope and the obvious fix isn’t the right one.
Our Gate Repair Services in Burlingame
Hinge Repair
Burlingame’s established neighborhoods feature a dense concentration of 1920s-1950s homes with original or period-replacement ornamental wrought-iron gates. Many of these use non-standard hinge dimensions that big-box stores don’t stock. We fabricate and fit replacement hinges to match, or weld and grind existing hinge pins back to true when the salt air hasn’t eaten too far into the metal. A typical hinge repair or replacement in Burlingame runs $180-$340.
Post Repair
Gate posts in Burlingame take a beating from two directions: the salt fog attacks the metal, and the winter rains soften the soil. Posts on grades - common in Burlingame Hills - lean faster as water runs downhill and undermines the footing. We reset posts in concrete with proper drainage, or weld and reinforce steel posts where the base has rotted through. Post repair in Burlingame typically costs $280-$520 depending on whether we’re resetting an existing post or installing a new one.
Weld Repair
Ornamental iron gates near the Bay corrode from the inside out. By the time you see rust blooming on the surface, the metal beneath is already thinning. Our weld repair service cuts out compromised sections, fabricates matching replacements, and finishes with rust-inhibiting primer and paint. For 1920s Spanish Colonial and Tudor Revival gates, we match the original scrollwork and finial patterns rather than slapping on generic panels. Weld repair in Burlingame runs $220-$480 for localized work, $650-$1,200 for extensive frame restoration.
Gate Realignment
This is the service we perform most often in Burlingame after winter rains. Wood and composite gates swell with moisture, throwing automated systems out of their calibrated travel limits. The gate hits the stop hard, or reverses unexpectedly, or the operator strains and burns out. We realign the gate, recalibrate the operator limits, and check that the safety sensors still read true. Gate realignment in Burlingame typically costs $150-$280. If the operator has already been damaged, add $340-$580 for circuit board or motor replacement.
Rust Treatment
Given Burlingame’s coastal exposure, we treat rust as prevention, not just cure. Our rust treatment service strips failing paint and scale, applies phosphoric acid converter to stabilize remaining oxidation, then primes and topcoats with marine-grade enamel. For automated gates, we also inspect and treat internal operator housings where salt fog has penetrated. Rust treatment for a standard residential gate in Burlingame runs $280-$450.
Lock Repair
Mechanical and electronic gate locks corrode in the salt air just like everything else. We repair or replace magnetic locks, electric strikes, and mechanical deadbolts, and we can integrate new access control with your existing automation system. Lock repair in Burlingame typically runs $180-$380.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Burlingame
We are trained and equipped on nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters in Burlingame because many hillside estates were installed with European operators like FAAC or BFT that require proprietary tools and software to service properly. We carry those tools. We also stock common failure parts locally - circuit boards for Viking and DoorKing operators, gear kits for Ghost Controls, limit switches for Linear - so Burlingame customers aren’t waiting on shipping. Most brand-specific repairs are completed in a single visit.
Common Gate Repair Problems We See in Burlingame Homes
- Corroded operator circuit boards and wiring. The persistent marine layer delivers salt-air humidity year-round, degrading the circuit boards and wiring in automated operators faster than the same products fare in drier inland microclimates. We see LiftMaster and FAAC boards failing at four to six years in Burlingame versus eight to ten in San Mateo.
- Wood and composite gates swelling out of travel limits. Burlingame receives roughly 22-24 inches of rain annually concentrated in winter. That moisture swells wood and composite gates enough to throw automated systems out of calibration each wet season. The gate hits the post hard, or the operator reverses thinking it’s hit an obstacle.
- Steep-grade drift failure in Burlingame Hills. On grades exceeding 10-15%, swing gates develop a recurring problem once counterbalance hardware corrodes in the salt air. The gate slowly creeps open or closed under its own weight, stripping the operator gearbox even when the electronic components are otherwise fine. Local technicians learn to spec heavy-duty stainless counterbalance hardware on any hillside install here as a matter of course.
- Non-standard hinge dimensions on period gates. Many 1920s-1950s homes retain original ornamental iron with hinge pins and brackets that don’t match modern standards. We fabricate to fit rather than forcing a generic replacement that looks wrong and wears fast.
Pricing for Gate Repair in Burlingame, CA
Here’s what gate repair costs in Burlingame’s market. These are the ranges we quote before any work begins:
- Hinge repair or replacement: $180-$340
- Post repair or reset: $280-$520
- Weld repair (localized): $220-$480
- Weld repair (extensive frame restoration): $650-$1,200
- Gate realignment: $150-$280
- Operator circuit board or motor replacement: $340-$580
- Rust treatment (full gate): $280-$450
- Lock repair or replacement: $180-$380
- Seasonal tune-up: $89
What moves a job toward the higher end? Extensive corrosion requiring multiple components, steep grades needing stainless hardware upgrades, and period gates requiring custom fabrication. What keeps it lower? Catching problems early, before the salt air has done its worst work. We offer $50 off any repair over $250, and a free second opinion on any written estimate you’ve already received. Senior and veteran customers receive 5% off, always. Call (833) 754-7503 for an exact quote - estimates are free.
We Also Serve Cities Near Burlingame
Our service area extends throughout the central Peninsula. We regularly repair gates in Hillsborough, Millbrae, San Mateo, and San Bruno. The same salt-air corrosion patterns affect gates in all these communities, though Burlingame’s direct Bay exposure makes it the most aggressive environment. Wherever you are, the same technician standards and the same 90-Day Done Right Promise apply.
Serving Burlingame, CA - Our Local Coverage Area
We’re based in the Burlingame area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Burlingame
Once a year, ideally before the winter rains begin. The salt fog works continuously, and catching corrosion at the surface-rust stage costs a fraction of replacing a failed circuit board or snapped spring. Our $89 seasonal tune-up includes a full corrosion inspection, lubrication with marine-grade grease, and a written condition report. Call (833) 754-7503 to schedule - estimates are free.
The counterbalance hardware has likely corroded in the salt air, allowing the gate’s weight to overcome the operator’s holding force on the grade. This is a pattern we see specifically on Burlingame Hills driveways exceeding 10% slope. The fix is replacing the corroded steel counterbalance components with heavy-duty stainless hardware, then recalibrating the operator. Left unaddressed, the creeping motion will strip the gearbox even if the motor and electronics are fine. Call (833) 754-7503 - we can usually diagnose this in one visit and repair same-day.
Four years is actually typical for operator circuit boards in Burlingame’s salt-air environment, versus eight to ten years inland. The marine layer penetrates housing seals and corrodes traces and connectors. We replace failed boards, but more importantly we inspect how moisture is getting in and whether better sealing or a housing upgrade would extend the next board’s life. Call (833) 754-7503 for diagnosis and an exact quote - estimates are free.
Yes. Burlingame’s period homes often have non-standard hinge pins and brackets that haven’t been manufactured for decades. We measure, fabricate, and fit replacement hinges to match the original dimensions and load requirements. The gate swings true, and the hardware looks like it belongs there. Call (833) 754-7503 to arrange a measurement visit - estimates are free.
Yes. Rust treatment is one of our most-requested services in Burlingame because the salt fog accelerates oxidation so aggressively. We strip scale and failing paint, apply rust converter to stabilize what remains, then prime and topcoat with marine-grade enamel rated for coastal exposure. For automated gates, we also treat internal operator housings where salt fog has penetrated. Rust treatment for a standard residential gate runs $280-$450. Call (833) 754-7503 for an exact quote - estimates are free.
Ready to get your gate working right? Call Ironworks Gate Co. at (833) 754-7503. A live person will answer, day or night. We’ll give you an upfront price, show up when we say, and back the work with our written 90-Day Done Right Promise. Done right - and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Burlingame and Peninsula communities since 1984.