Fast, Reliable Gate Parts & Welding Across Union Park
Gate parts and welding in Union Park typically run $180-$650 depending on the repair, and most jobs are completed in a single visit with upfront pricing settled before we start. We carry heavy-duty hinges, posts, and welding equipment on every truck so acreage property owners don’t get stuck waiting on parts.
We’ve been driving out to Union Park since the early 1980s, back when most of these tract homes were still new and their aluminum gates were freshly hung. Forty years later, we’re the ones homeowners call when those same gates have corroded through, when posts have tilted in the clay soil after another wet season, or when a lightning surge has fried the opener control board. Our shop is stocked for heavy-duty work. We don’t send a handyman with a toolbox. We send a welder and a gate automation technician in one truck, because Union Park properties often need both.
Call (833) 754-7503. A live person answers, 24 hours a day, 7 days a week.
Why Ironworks Gate Co. Is Union Park’s Preferred Gate Parts & Welding Company
Union Park sits in unincorporated Orange County, and that single fact changes how gate work gets done here. Unlike Orlando or Winter Park, which have their own municipal codes, Union Park falls under Orange County’s permitting and code jurisdiction. Setback rules for automated gates are different. Opener permits have their own requirements. We’ve navigated these county offices for decades, and we know which jobs need a permit pulled and which don’t. That saves our Union Park customers delays and red tape.
Our technicians know the local failure patterns by heart. The 1970s-1990s tract housing stock means original aluminum and wrought-iron gates are now 30-40 years old, corroding in Central Florida’s humidity. The sandy, clay-mixed soils beneath gate posts saturate during June through September thunderstorms, causing chronic post lean. After a heavy wet season, we regularly find gates tilted 5-10 degrees, binding latches and jamming electric operators. This isn’t theory. It’s what we fix every week on Union Park driveways.
We recently replaced a corroded hinge set on a heavy aluminum swing gate in a Horseshoe Lake Estates property, where the original 1980s posts had tilted nearly 8 degrees after a wet season, jamming the gate against the latch. We welded in a heavy-duty FAAC hinge bracket, adjusted the post footing with helical anchors, and replaced the rusted control board on the LiftMaster opener - all in one trip, as the homeowner needed it done right the first time.
Our 90-Day Done Right Promise applies to every Union Park job. Written guarantee, no paperwork, no arguing. If it’s not right, we come back and make it right.
Our Gate Parts & Welding Services in Union Park
Hinge Replacement
Corroded hinges are the most common failure we see on Union Park’s aging aluminum and wrought-iron gates. Decades of Florida humidity eat through the original hardware, and once a hinge seizes or cracks, the gate drags, the opener strains, and the whole system goes out of alignment. We stock heavy-duty replacement hinges rated for oversized gates, and we weld mounting plates directly to the frame when the original attachment points have corroded away. A typical hinge replacement in Union Park runs $180-$340.
Post Replacement
Post replacement is where Union Park’s soil conditions really matter. The shallow footings common in 1980s construction don’t account for Orange County’s expansive clay pockets. After a wet season, posts lean, tilt, or heave entirely. We excavate to proper depth, set new posts in concrete footings designed for local soil conditions, and often add helical anchors for properties with chronic drainage issues. For automated gates, we ensure the new post placement meets Orange County setback requirements. Post replacement in Union Park typically costs $400-$650 depending on depth, soil condition, and whether the opener needs reinstallation.
Rail Repair
Bent or broken rails on ornamental gates are both a structural and cosmetic problem. We cut out damaged sections, fabricate matching replacements, and weld them in place with proper penetration and finish. For Union Park’s older wrought-iron gates, we match existing profiles rather than forcing a generic replacement that looks patched together.
Custom Welding
Not every gate problem has an off-the-shelf fix. We fabricate custom brackets, reinforce weakened frames, and build entirely new gate sections when the original has corroded beyond repair. Our mobile welding rigs run 220V MIG and stick equipment, so we can weld thick steel and aluminum on-site without hauling gates back to a shop. For Union Park acreage properties with heavy custom gates, this means same-day repair rather than weeks of downtime.
Gate Rollers
Sliding gate rollers wear flat spots, seize in their tracks, and leave rust streaks across the driveway. We stock V-groove and flat-profile rollers in multiple bearing grades, and we align the track system while we’re at it. Roller replacement in Union Park runs $200-$380 for most residential sliding gates.
Latch & Lock
A gate that won’t latch is a gate that won’t stay closed. We replace mechanical latches, install electric strikes for automated systems, and realign strike plates when post movement has thrown off the geometry. For Union Park properties with tilted posts, we often need to weld an adjustable latch bracket to compensate.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Union Park
We carry parts and are certified to service nine major gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Union Park customers, this means we don’t order parts and hope they fit. We stock common Linear and Viking control boards, Ghost Controls actuator arms, and DoorKing safety sensors on our trucks. When lightning takes out a board during a July thunderstorm, we can often replace it same day rather than leaving a gate stuck open for a week.
Common Gate Parts & Welding Problems We See in Union Park Homes
- Post tilt from clay soil saturation. Union Park’s sandy clay-mixed soils expand and contract with rainfall, and 1980s footings weren’t deep enough to prevent it. After a wet season, we commonly find gates tilted 5-10 degrees, binding the latch and overloading the opener.
- Corroded aluminum and wrought-iron gates from decades of humidity. Original gates on 1970s-1990s tract homes are now 30-40 years old. Hinge welds crack. Frames sag. We reinforce or replace sections as needed.
- Lightning surge damage to opener electronics. Central Florida’s near-daily summer thunderstorms send power surges through gate control boards and safety sensors. We replace damaged components and can recommend surge protection.
- Hinge fatigue on heavy acreage gates. Union Park properties with larger lots often have oversized gates that exceed the duty rating of original residential hardware. We upgrade to commercial-grade hinges and weld reinforcement plates.
Pricing for Gate Parts & Welding in Union Park, FL
| Service | Typical Range in Union Park |
|---|---|
| Hinge replacement (single gate) | $180-$340 |
| Post replacement (single post, standard depth) | $400-$650 |
| Custom welding / fabrication (hourly) | $150-$220 |
| Rail repair (per section) | $250-$480 |
| Gate roller replacement (set) | $200-$380 |
| Latch & lock realignment or replacement | $160-$290 |
These ranges reflect Union Park’s market for 2025. Final cost depends on gate size, material thickness, soil conditions for post work, and whether the job requires automation reconnection. We settle on an upfront price before starting. No surprises on the bill. Every repair over $250 qualifies for our $50 discount, and we always honor our 5% Senior and Veteran discount.
Call (833) 754-7503 for a free estimate.
We Also Serve Cities Near Union Park
Our Gate Parts & Welding in Union Park service extends to Winter Park, Azalea Park, Goldenrod, and Alafaya. The same heavy-duty trucks, the same stocked parts, the same one-trip standard. Whether you’re on a Winter Park estate or an Alafaya acreage, we drive out with welding gear and automation expertise ready.
Serving Union Park, FL - Our Local Coverage Area
We’re based in the Union Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Union Park
Post replacement on an existing gate in Union Park typically does not require a permit if you’re not altering the gate’s location or adding automation, but because Union Park is unincorporated Orange County, setback rules differ from nearby cities like Orlando or Winter Park. We check county requirements before starting and pull permits when needed. Call (833) 754-7503 and we’ll verify your specific situation - estimates are free.
Yes, lightning-induced power surges are a leading cause of gate opener control board failure in Union Park during summer storm season. The control board or safety sensors have likely taken surge damage, and continuing to reset the breaker risks further damage to the motor. We stock replacement LiftMaster boards and can test the full system. Call (833) 754-7503 - we can usually diagnose and repair same day.
Post tilt is the most likely cause. In Union Park, expansive clay soils and shallow 1980s footings cause posts to shift 5-10 degrees after wet seasons, throwing off latch alignment. We see this constantly. Sometimes we can weld an adjustable bracket to compensate; other times the post needs resetting or replacement. We’ll know once we look at it. Call (833) 754-7503 for a free estimate.
No. Heavy gates on Union Park acreage properties exceed the duty cycle and weight ratings of standard residential openers, and installing one leads to premature motor failure and safety risks. We spec commercial-grade operators from Viking or DoorKing, sized to the gate’s actual weight and wind load. Our Gate Parts & Welding team welds reinforced mounting brackets and ensures the post structure can handle the load. Call (833) 754-7503 - we’ll measure and spec it right.
Yes, in most cases we replace the roller set without replacing the entire gate or track. We stock sealed-bearing rollers that resist Central Florida humidity better than the original hardware, and we align the track while we’re at it. Typical roller replacement in Union Park runs $200-$380. Call (833) 754-7503 for an exact quote - estimates are free.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Union Park and Central Florida since 1984.