Fast, Reliable Gate Parts & Welding Across Everett
Gate parts and welding repair in Everett typically runs $180-$650 depending on the component, with most hinge, post, and rail jobs completed in a single visit. We carry common hinges, rollers, latches, and welding supplies on every truck, so your gate isn’t sitting half-fixed while parts get ordered.
We’ve been answering calls from Everett homeowners since 1984, and we know the triple-decker blocks off Broadway, the tight shared driveways near Ferry Street, and the salt-beaten ironwork along the Mystic River. Our technicians are on the road with stocked trucks and welding equipment, ready to drive to Everett from our dispatch. When your gate won’t latch, your post has heaved, or your hinges have rusted through, call (833) 754-7503. A live person answers, day or night.
Why Ironworks Gate Co. Is Everett’s Preferred Gate Parts & Welding Company
Everett’s not a generic suburb, and gate repair here isn’t generic work. The city’s packed with two- and three-family homes built between 1890 and 1930, most sitting on narrow lots with original wrought-iron or galvanized chain-link gates that haven’t seen proper maintenance in decades. We understand how the freeze-thaw cycle heaves posts out of plumb, how salt air off the Mystic River eats hardware faster than inland towns, and how an 8-foot driveway changes everything about what gate will actually work.
Our customers in Everett call back because we show up when we say we will, price the job before we start, and back every repair with our written 90-Day Done Right Promise. No paperwork to file, no argument if something needs adjustment. We just come back and make it right.
We also answer the phone. A real person, 24 hours a day, 7 days a week. No voicemail trees, no callback queues, no waiting until Monday morning while your gate hangs open.
Our Gate Parts & Welding Services in Everett
Hinge Replacement
Everett’s older wrought-iron and chain-link gates often run on hinges that were installed thirty or forty years ago, sometimes longer. The salt moisture rising off the Mystic River corrodes the pins and barrels faster than you’d see in Malden or Medford, and once a hinge seizes or snaps, the whole gate goes out of alignment. We stock heavy-duty ball-bearing hinges, weld-on barrel hinges, and adjustable j-bolt hinges on every truck, and we match the hardware to your gate’s weight and usage. Most hinge replacements in Everett run $180-$320 for a standard residential gate.
Post Replacement
This is where Everett’s local conditions really show. Boston’s freeze-thaw cycle - forty-plus inches of snow most winters - heaves posts set in older concrete, throwing the gate frame out of square and binding the latch every spring. Wood posts rot from the ground up, especially where road-salt runoff pools. We pull the old post, set a new steel or pressure-treated post in proper concrete footing below the frost line, and realign the gate so it swings or slides true. Post replacement in Everett typically costs $350-$650 depending on material and whether we need to relocate the post to fix clearance issues.
Rail Repair & Custom Welding
Bent or broken rails are common on Everett’s older gates, especially where delivery trucks or snowplows have made contact on tight driveways. We cut out the damaged section, fabricate a matching replacement from steel or wrought iron, and weld it in place with proper penetration and finish. For gates where standard parts simply don’t exist anymore, our Gate Parts & Welding team builds custom solutions on site. Custom welding and rail repair in Everett generally runs $280-$550.
Gate Rollers & Track Systems
On Everett’s narrow lots, sliding gates are often the only practical option, but the rollers and track take a beating. Salt grit gets into the bearings, the track clogs with debris, and the gate starts jumping or jamming. We replace v-groove rollers, cantilever rollers, and carriage assemblies, and we clean or replace the track itself. New rollers and track adjustment in Everett typically costs $220-$400.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Everett
We keep parts in stock for the brands Everett property owners actually have installed: Linear, Viking, Ghost Controls, and DoorKing among them. Whether it’s a residential swing operator on a triple-decker near Glendale Park or a new commercial slide gate off Lower Broadway, our technicians are trained and equipped to diagnose and fix it on the first visit. We also service FAAC, BFT, LiftMaster, Elite, and Mighty Mule systems. Most brand-specific repairs in Everett are completed same-day because the parts travel with us, not on a delivery truck from a warehouse two states away.
Common Gate Parts & Welding Problems We See in Everett Homes
- Freeze-thaw heave throws posts out of plumb. Every spring, we get calls from Everett homeowners whose gates worked fine in October but won’t latch in April. The post has shifted in its footing, and the frame is binding. We reset the post and realign - usually in one visit.
- Salt-laden air from the Mystic River accelerates rust. Galvanized chain-link hardware and wrought-iron hinges that might last fifteen years inland are showing serious corrosion in eight to ten years in Everett. We upgrade to stainless or powder-coated hardware where it makes sense.
- Confined driveways force mid-job conversions. On the dense residential blocks off Broadway and Ferry Street, shared driveways often run only 8-9 feet wide. A standard double-swing gate physically cannot operate without hitting the neighboring structure. We frequently discover this on arrival and convert to a single-leaf or sliding configuration on the spot.
- Road-salt runoff rots wood posts from below. Where snow piles up against the gate and melts, the base of the post sits in salty moisture for months. We see this constantly on Everett’s older triple-decker properties, and we address it with proper drainage, concrete collars, or steel post upgrades.
Pricing for Gate Parts & Welding in Everett, MA
We don’t believe in mystery pricing. Here’s what gate parts and welding work typically costs in Everett’s market:
| Service | Typical Range in Everett |
|---|---|
| Hinge replacement (pair) | $180 - $320 |
| Gate roller / track repair | $220 - $400 |
| Custom welding / rail repair | $280 - $550 |
| Post replacement (wood or steel) | $350 - $650 |
| Latch and lock replacement | $150 - $280 |
What moves the price: material type (steel costs more than wood), whether we need to break and re-pour concrete, and whether the job turns into a clearance conversion mid-stream. We settle the full price before we start - no surprises on the bill. Estimates are free, and our $89 Seasonal Tune-Up catches problems before they become expensive repairs. Seniors and veterans receive 5% off every job, always.
We Also Serve Cities Near Everett
Our service area extends to Eastmont, Mukilteo, Mill Creek, and Silver Firs for homeowners who need the same straightforward gate repair we provide in Everett. If you’re just outside city limits, call (833) 754-7503 and we’ll confirm coverage. For our full local service area, visit our page on Gate Parts & Welding in Everett.
Serving Everett, MA - Our Local Coverage Area
We’re based in the Everett area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Everett
We reset the post in proper concrete below the frost line and realign the gate frame so the latch meets the striker plate squarely. In Everett, this is almost always caused by freeze-thaw heave, and it returns every spring if the post isn’t set deep enough or the concrete footing is too shallow. Post replacement and realignment typically runs $350-$650. Call (833) 754-7503 for a free estimate.
Yes, but you’ll likely need a single-leaf swing gate or a sliding gate instead of a double-swing. We measure on arrival and can fabricate a custom solution if standard sizes won’t clear. On a triple-decker off Ferry Street, we arrived expecting a simple hinge swap on a pair of galvanized swing gates, but the 8-foot-wide driveway left no clearance. We pivoted on the spot, fabricating a custom single-leaf sliding gate with a LiftMaster LA500 slide gate operator and replacing the rotted wood post with a steel one set in concrete - solving the binding issue and the corrosion from road-salt runoff. Call (833) 754-7503 to schedule a site evaluation.
Everett’s position directly on the Mystic River means salt-laden air is a year-round factor, visibly outpacing the rust rates seen in landlocked neighbors like Malden or Medford. Road-salt runoff from municipal plowing adds to the problem, especially on lower gates and posts. We address this with stainless hardware upgrades, proper drainage at the post base, and protective coatings where appropriate. For hardware that’s already failing, replacement typically runs $180-$320. Call (833) 754-7503 and we’ll assess what can be salvaged.
We are trained and equipped on nine major automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. The commercial boom along Lower Broadway anchored by Encore Boston Harbor has introduced a parallel demand for vehicular-access and security gate systems that barely existed in Everett a decade ago, so we’ve invested in the parts inventory and training to match. Most commercial operator repairs run $280-$550. Call (833) 754-7503 for same-day diagnosis.
Usually, yes. If the frame is sound and the latch point hasn’t torn away, we can fabricate a weld repair or a custom catch plate that restores function without a full gate replacement. We bring a portable welder to every Everett job, so we’re not guessing - we’re cutting and fitting on site. Simple weld repairs start around $180; more involved fabrication runs $280-$400. Call (833) 754-7503 for an exact quote - estimates are free.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Everett since 1984.