Fast, Reliable Gate Installation Across Union Park
A new gate installation in Union Park typically runs $2,800-$7,500 depending on size, material, and automation, with most projects completed in a single day. Ironworks Gate Co. has been building and installing gates for Union Park homeowners since 1984, and we know the specific challenges this unincorporated Orange County community presents: shallow 1980s footings that fail in wet weather, original aluminum gates now corroding after forty years, and acreage properties that demand heavier-duty equipment than standard suburban setups. If you’re ready for a gate that closes like the day it was hung, call us at (833) 754-7503. A live person answers, 24 hours a day, 7 days a week.
Why Ironworks Gate Co. Is Union Park’s Preferred Gate Installation Company
We’ve been driving out to Union Park for over four decades, long before the growth along Alafaya Trail changed the traffic patterns. Our technicians know the difference between a 1970s ranch near Goldenrod Road and a 1990s subdivision off Old Union Park Road, and we adjust our footing depths and post specs accordingly. Union Park residents don’t call us for the cheapest bid in Orange County. They call because their neighbor’s gate still swings true ten years after we installed it, or because they watched another company make three trips and still leave the latch binding.
Our response time to Union Park averages under 90 minutes for emergency calls, and we schedule new installations within 3-5 business days. Every job carries our 90-Day Done Right Promise, the Keystone Standard: written, no paperwork, no arguing. If it’s not right, we come back and make it right. That promise has been in force since 1984, and it applies to every gate we install in ZIP code 32790 and surrounding Union Park addresses.
Our technicians are background-checked, uniformed, and guided by the K.E.Y.S. values code: Krafted right, Every time, Your home first, Standing behind it. The 400th Union Park job gets the same care as the first.
Our Gate Installation Services in Union Park
Swing Gate Installation
Swing gates remain the most common request we receive in Union Park, especially for the single-family tract homes built from the 1970s through the 1990s. These properties typically have modest front setbacks and original aluminum or wrought-iron gates now hitting 30-40 years of age. We install new swing gates with heavy-duty 6-inch steel posts set below Orange County’s expansive clay line, not the shallow 18-inch footings that failed the first time around. Our Gate Installation team can automate your new swing gate with operators from Viking, Ghost Controls, or Elite, depending on your gate weight and usage frequency.
Sliding Gate Installation
Union Park’s larger acreage properties, particularly those off longer service drives near the rural edges of the community, need sliding gates that can handle daily use without binding or drifting. We recently replaced a heavy-duty sliding gate for a homeowner on Old Union Park Road whose 1980s post had tilted six degrees after a wet summer, binding the original FAAC operator. We dug new footings below the clay line, set heavy-duty 6-inch steel posts in concrete, and installed a LiftMaster SL3000 swing gate opener-all in one trip, as the customer requested. Sliding gates eliminate the swing radius problem on narrow driveways and work reliably on slopes where a swing gate would hang unevenly.
Security Gate Installation
A security gate in Union Park needs to account for Central Florida’s specific threats: not just unauthorized entry, but the environmental factors that disable automation when you need it most. We install security gates with surge-protected control boards and grounded safety sensors to withstand the lightning strikes that accompany June through September thunderstorms. Our security gate installations include keypad and remote access integration, with brands like DoorKing and Elite that we stock parts for locally. No waiting two weeks for a control board while your property sits unsecured.
Pedestrian Gate Installation
Many Union Park homes have wooden privacy fence gates leading to backyards, separate from the main driveway entrance. These pedestrian gates suffer hinge fatigue and post rot from decades of Florida humidity, especially on the original pressure-treated posts installed in the 1980s and 1990s. We replace pedestrian gates with galvanized steel frames and set posts in concrete below the clay swelling zone, so your side gate doesn’t sag or drag after the next wet season.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Union Park
We are trained and equipped on nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Union Park customers, this means the correct fix or installation happens on the first visit, whatever equipment is on your driveway. We maintain local inventory of common Viking and Ghost Controls components, plus Elite access control modules, so most automation projects don’t face shipping delays. When you need a gate that works every morning without fuss, matching the right brand to your gate weight, usage pattern, and property layout matters. We handle that specification during your free estimate, with upfront pricing settled before we turn a single bolt.
Common Gate Installation Problems We See in Union Park Homes
- Shallow footings tilting after rain. Gate posts installed in the 1980s were commonly set in shallow footings that don’t account for Orange County’s expansive clay pockets. After a wet season, we regularly find gates tilted 5-10 degrees, binding the latch or jamming the electric operator entirely.
- Original aluminum and wrought-iron gates corroding en masse. The concentration of 1970s-1990s tract homes in Union Park means thousands of residential gates are now 30-40 years old, suffering hinge fatigue and frame degradation from Central Florida’s punishing humidity.
- Lightning damage to automated operators. Summer thunderstorms deliver near-daily lightning strikes that fry control boards and safety sensors. We install surge protection and proper grounding on every automated gate to prevent this.
- Post rot in wooden privacy fence gates. The sandy, clay-mixed soils beneath Union Park’s backyard gates hold moisture against wooden posts, causing chronic rot that makes gates drag or refuse to latch.
Pricing for Gate Installation in Union Park, FL
Here is what gate installation costs in the Union Park market, based on our 42 years of local pricing data:
| Gate Type | Typical Range in Union Park |
|---|---|
| Single swing gate (manual, aluminum) | $2,800 - $4,200 |
| Double swing gate (manual, aluminum) | $4,000 - $6,000 |
| Sliding gate (manual, steel frame) | $4,500 - $6,800 |
| Automated single swing gate with opener | $5,200 - $7,500 |
| Automated sliding gate with opener | $6,500 - $9,000 |
| Security gate with keypad/intercom | $7,000 - $11,000 |
| Pedestrian gate replacement | $1,200 - $2,400 |
What moves you within these ranges? Gate material (aluminum vs. steel vs. wrought iron), automation brand and features, driveway length and slope, and whether we need to excavate failed footings before setting new posts. Union Park’s clay soil and older housing stock often require deeper footings than new construction in Winter Park or Alafaya, which can add $400-$800 to projects where original posts must be removed. We give you a written, itemized estimate before any work begins. No surprises on the bill. Call (833) 754-7503 for your free estimate-senior and veteran discounts apply, always.
We Also Serve Cities Near Union Park
Our installation crews work throughout central Orange County, including Union Park and neighboring Winter Park, Azalea Park, Goldenrod, and Alafaya. The same 90-Day Done Right Promise, the same live-answer phone support, and the same one-trip completion standard apply whether you’re on Old Union Park Road or across the line in Winter Park. If you’re unsure whether your address falls in our service area, call and ask. A real person will tell you directly.
Serving Union Park, FL - Our Local Coverage Area
We’re based in the Union Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Union Park
Yes. Because Union Park is unincorporated, all automated gate installations fall under Orange County’s permitting and code jurisdiction, not any municipal authority. The county requires permits for automated gate openers specifically, with setback rules that vary based on your property’s frontage and proximity to the right-of-way. We handle the permit application as part of our installation process and build to Orange County’s electrical and safety codes, including required safety sensors and manual release mechanisms. Call (833) 754-7503 and we’ll confirm whether your specific Union Park property requires additional documentation.
Gate posts in Union Park should be set at least 36 inches deep, below the expansive clay layer that swells during the rainy season. The original 1980s installations we encounter were often set at 18 inches or less, which is why so many have tilted and failed. We dig to stable soil, use 6-inch steel posts for heavy gates, and set them in concrete with proper drainage to prevent the 5-10 degree tilts that bind latches and jam operators. For a free assessment of your specific soil conditions, call (833) 754-7503.
Sometimes, but often the footing failure has stressed the gate frame beyond repair. We can straighten a mildly tilted post and adjust the hinges if the frame is sound, but if the gate has been binding for multiple seasons, the latch side has likely warped or the hinge welds have cracked. We evaluate this on every Union Park call and give you an honest assessment: repair if it makes sense, replace if it doesn’t. Our $89 Seasonal Tune-Up includes hinge adjustment and post inspection. Call (833) 754-7503 to schedule.
We install surge protectors at the control board and ground the entire automation system to a dedicated earth rod, not just the household ground. For properties with frequent lightning exposure, we also recommend Ghost Controls operators with built-in surge resistance and battery backup, so your gate operates even after a power hit. The sandy, well-drained soils in parts of Union Park actually make proper grounding more critical, not less. Ask about lightning protection during your free estimate-call (833) 754-7503.
Yes. We specialize in heavy-duty sliding gates for Union Park’s larger properties, with steel-framed gates up to 20 feet wide and operators rated for continuous daily cycling. Long driveways require proper voltage drop calculations for low-voltage control wiring, and we spec LiftMaster or Viking commercial-grade operators for these applications. Every acreage installation includes the same one-trip completion standard and 90-Day Done Right Promise. For a written estimate with upfront pricing, call (833) 754-7503.
Ready for a gate that works the way it should? Call Ironworks Gate Co. at (833) 754-7503 for your free estimate. A live person will answer, 24 hours a day, 7 days a week. We’ll be there when we say, we’ll give you a square deal with upfront pricing and no surprises on the bill, and we’ll stand behind it with our written 90-Day Done Right Promise. Done right, and backed in writing. That’s how we’ve worked in Union Park for over 42 years.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Union Park since 1984.