Fast, Reliable Gate Installation Across Sunset
Gate installation in Sunset typically runs $2,800-$7,500 for a standard residential driveway gate with automation, and most jobs are completed in a single day once permits are approved. For the older homes and acreage properties around Southwest 72nd Street and the 33173 ZIP, we bring heavy-duty equipment and welding rigs built for the kind of work that stops general contractors cold. We’ve been driving these streets since 1984, and we know the shallow footings, the flooded conduits, and the county inspectors by name. If you’re tired of callbacks and patch jobs, call us at (833) 754-7503. A live person answers, 24 hours a day.
Why Ironworks Gate Co. Is Sunset’s Preferred Gate Installation Company
Sunset homeowners don’t have time for second visits. Our Gate Installation team treats every job in this unincorporated Miami-Dade pocket like the permanent installation it should be, not a temporary fix waiting to fail.
We’ve built our reputation here on showing up when we say we will and leaving gates that close like the day they were hung. Our technicians are background-checked, uniformed, and trained on nine automation brands, so the correct fix happens on the first trip. The 90-Day Done Right Promise, our Keystone Standard, covers every installation in writing. No paperwork to file, no argument to have. If it’s not right, we come back and make it right.
Our response time to Sunset averages under two hours for emergency calls, because we keep parts and welding equipment stocked for the specific failures this neighborhood produces. We know which county inspector handles the 33173 permit route, and we know that post-Hurricane Andrew wind-load ordinances require 175+ mph engineering on every new gate frame. That knowledge saves our customers weeks of delay and rework.
When you call (833) 754-7503, a live person answers. Not a voicemail tree. Not an answering service. Someone who can dispatch a technician tonight if your gate is stuck open and the rainy season is coming.
Our Gate Installation Services in Sunset
Swing Gate Installation
Swing gates remain the most common style on Sunset’s single-family ranch homes, but the original 1980s-90s installations are failing in predictable ways. Posts set in shallow footings heave and crack after decades of groundwater saturation. We excavate to proper depth, pour engineered footings with rebar cages, and hang new aluminum or steel frames that meet current Miami-Dade wind-load code. For the ornamental wrought-iron gates that define so many Sunset driveways, we fabricate matching pickets and scrollwork in our shop.
Sliding Gate Installation
Sliding gates solve the space problem on narrow lots typical of Sunset’s mid-century homes, where a swing gate would block the driveway or sidewalk. We install cantilever and track-mounted systems with heavy-duty rollers rated for coastal humidity. The critical detail in 33173 is the foundation: our crews pour independent concrete piers for the track, tied below the water table influence zone, so the gate rolls true year after year. We recently installed a new FAAC 740 hydraulic swing gate operator for a home on Southwest 72nd Street. The original 1990 wiring was in standard PVC conduit, flooded from the June rains, which had fried two control boards in three years. Our tech re-ran the wiring in sealed, elevated schedule 80 conduit and relocated the board to a weatherproof enclosure, ending the repeat-call cycle.
Double Gate Installation
Double gates, or bi-parting systems, suit wider Sunset driveways and estate entrances where a single leaf would be impractical. We synchronize the operators so both leaves meet flush without drift, and we reinforce the meeting stile with welded steel backing plates. Every double gate we install in Sunset includes independent manual release mechanisms on both sides, required by county code for emergency egress.
Pedestrian Gate Installation
Side-yard pedestrian gates on Sunset’s older homes were often afterthoughts, hung on wood posts or light steel that rusts through in five years. We replace these with galvanized steel frames, concrete-set posts, and matching access hardware. For homes with pool enclosures, we integrate self-closing hinges and latches that meet Florida pool barrier code.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sunset
We are trained and equipped on nine gate-automation brands, and we stock parts locally for the systems most common in Sunset’s established neighborhoods. Our technicians carry FAAC hydraulic operators, BFT electromechanical units, and Linear slide and swing systems on every truck, along with Viking control boards and replacement motors. This inventory means most Sunset installations are completed in one visit, with no waiting for parts to ship. We also service and install Ghost Controls, DoorKing, Elite, and Mighty Mule systems for homeowners with existing equipment they want to keep.
Common Gate Installation Problems We See in Sunset Homes
- Shallow gate post footings crack and heave after decades of ground saturation in Sunset’s high water table. The original 4-inch concrete cookie crumbles, and the post leans until the gate binds or drags. We excavate to 36-inch minimum depth and pour engineered footings with rebar.
- Non-waterproof original low-voltage wiring floods every wet season, causing operator control board short circuits. The June-October rains in 33173 submerge shallow conduit runs regularly. We replace with sealed, elevated schedule 80 conduit and weatherproof enclosures.
- Post-Hurricane Andrew wind-load ordinances require permitted, engineered gate replacements. Many Sunset homeowners are caught off guard when a gate fails and they learn a simple swap is not allowed. We handle the engineering, permit application, and county inspection scheduling as part of every installation.
- Corroded hinge pins and sagging frames on 30-40 year old ornamental iron gates. The Cuban-American homeowners who installed these gates in the 1980s-90s chose heavy wrought iron for security and presence. We restore the aesthetic with modern aluminum or galvanized steel that won’t rust through, matched to the original design.
Pricing for Gate Installation in Sunset, FL
Honest pricing means numbers, not vagueness. Here is what gate installation costs in the 33173 market:
| Service | Typical Range in Sunset |
|---|---|
| Single swing gate, manual (aluminum) | $2,800 - $4,200 |
| Single swing gate with automation | $4,500 - $6,800 |
| Sliding gate with track and motor | $5,200 - $7,500 |
| Double swing gate with dual operators | $6,800 - $9,500 |
| Pedestrian gate, manual | $1,400 - $2,400 |
| Engineering and permits (Miami-Dade) | $800 - $1,500 |
Factors that move the price: gate material (aluminum vs. steel vs. wrought iron), automation brand and features, need for new footings or electrical runs, and permit complexity. We settle the full price before we turn a single bolt. No surprises on the bill. Free estimates are available by calling (833) 754-7503. Senior and veteran customers receive 5% off, always.
We Also Serve Cities Near Sunset
Our crews work throughout unincorporated Miami-Dade and regularly travel to Olympia Heights, Westwood Lake, Richmond Heights, and Kendale Lakes. If you’re searching for Gate Installation in Sunset or nearby, the same crew, same equipment, and same 90-Day Done Right Promise travel with us. We know the permit routes and inspectors for each municipality.
Serving Sunset, FL - Our Local Coverage Area
We’re based in the Sunset area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Sunset
The high water table in 33173 floods shallow, non-waterproof conduit every rainy season, corroding connections and frying control boards. Original 1980s-90s installations used standard PVC at inadequate depth. We replace with sealed, elevated schedule 80 conduit in weatherproof enclosures. Call (833) 754-7503 for a free inspection of your existing wiring.
Yes. Miami-Dade’s post-Hurricane Andrew ordinances require 175+ mph wind-load engineering and county permits for any replacement or major repair. We handle the engineering, application, and inspection scheduling. Most homeowners are surprised by this requirement. We build it into every quote so there are no delays. Call (833) 754-7503 to discuss your project.
Sometimes, if the frame is straight and the material is salvageable. We weld new heavy-duty hinges with grease fittings and stainless steel pins. But on 30-40 year old Sunset gates, the hinge location often reveals frame rot or post failure that makes partial repair a false economy. We will show you both options and let you decide. Estimates are free at (833) 754-7503.
Yes. Sliding gates are specifically designed for tight spaces where a swing gate would block traffic. We measure your clearance, engineer the track foundation below the water table influence, and select a low-profile operator that fits your setback. Most 33173 ranch lots can accommodate a 10-14 foot sliding gate with proper planning. Call (833) 754-7503 for a site evaluation.
We use sealed schedule 80 PVC conduit, elevated above typical flood levels, with watertight junction boxes and corrosion-resistant connections. The control board is relocated to a weatherproof enclosure, never buried or surface-mounted where pooling occurs. This is the only method we have found that ends the repeat-call cycle in 33173. Call (833) 754-7503 for details on your installation.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Sunset and Miami-Dade County since 1984.