Fast, Reliable Gate Installation Across Pelham
A new gate installation in Pelham typically runs $3,200-$8,500 for a standard driveway swing or sliding gate, with custom wrought iron estate work reaching $12,000-$18,000. Most Pelham installations are completed in one to two days, with our Pelham crew arriving from our Westchester routing hub within 45 minutes of your call. We’re familiar with the fieldstone pillars, the original 1920s ironwork, and the salt air that eats at both. Call (833) 754-7503 for a free, upfront estimate - we’ll settle the price before a single bolt is turned.
We’ve been driving to Pelham since 1984. We know the difference between a Pelham Manor estate on Iden Avenue with original 1930s ironwork and a mid-century split-level near the Hutchinson River Parkway that needs a clean, modern security gate. That local knowledge matters when you’re matching a century-old finial or calculating how deep to set posts in soil that freezes hard by January.
Why Ironworks Gate Co. Is Pelham’s Preferred Gate Installation Company
Pelham homeowners don’t call us for the lowest bid. They call us because their neighbor on Corlies Avenue did, or because their contractor mentioned our name after seeing us fabricate a custom hinge on a 1920s gate that three other companies said couldn’t be saved. Over 42 years, we’ve built a reputation in southern Westchester for showing up when we say we will, pricing honestly, and standing behind the work with a written guarantee.
Our response time to Pelham averages under an hour for scheduled estimates, and our 24-hour live phone line means you speak to a person, not a voicemail tree, whether you call at 9 AM on Tuesday or 7 PM on Sunday. Our technicians are background-checked, uniformed, and trained on nine automation brands - so the correct fix happens on the first visit.
The 90-Day Done Right Promise, our Keystone Standard, applies to every Pelham job. No paperwork to file, no arguing, no exceptions. If it’s not right, we come back and make it right.
Our Gate Installation Services in Pelham
Swing Gate Installation
Swing gates remain the signature entry for Pelham Manor’s Tudor Revival and Colonial Revival estates, and they’re what we install most often here. The challenge in Pelham isn’t the gate itself - it’s the century-old masonry pillars that must bear it, and the salt-laden air that corrodes hinges within five to seven years instead of the fifteen you’d expect inland. We recently installed a custom swing gate on a Tudor Revival estate on Pelhamdale Avenue, Pelham Manor. The original 1930s wrought iron had terminal hinge corrosion from decades of salt air. We fabricated a replica finial to match the original, paired with a whisper-quiet LiftMaster smart opener integrated into the homeowner’s automation system. Our swing gate installations in Pelham start at $3,800 for standard steel, with custom wrought iron and automation ranging $7,500-$14,000.
Pedestrian Gate Installation
Pelham Manor properties often separate the main driveway gate from a smaller pedestrian entry along a fieldstone wall or hedge line. These gates see more daily use than the driveway gate, and their lighter construction makes them more vulnerable to salt-air pitting at latches and self-closing mechanisms. We install pedestrian gates with marine-grade hardware and adjustable hydraulic closers rated for coastal exposure, typically $1,800-$3,200 depending on iron matching and access control integration.
Security Gate Installation
For Pelham homeowners on larger lots near the Sound - especially along Shore Road and its tributary streets - a security gate is the first line of defense, not a decorative afterthought. We install steel and aluminum security gates with integrated keypad, intercom, and cellular access systems, tied to Viking or DoorKing control boards for reliability in salt-air conditions. Security gate installations in Pelham run $5,500-$12,000 with full automation and access control.
Sliding Gate Installation
When a Pelham driveway slopes steeply toward the street or the entry is too narrow for a swing arc, a sliding gate is the practical choice. We install cantilever and track-mounted systems with sealed Linear operators, engineered for the freeze-thaw heave that shifts gate post footings annually in southern Westchester. Sliding gate installations start at $4,200, with estate-grade aluminum or steel systems reaching $9,500.
Double Gate & Driveway Gate Installation
The formal double gate - two matching swing leaves meeting at a center stop - is the classic Pelham Manor statement. These installations demand precise leveling across two independent masonry pillars, often requiring footing reinforcement or pillar rebuilding before the gate hangs true. Double driveway gate installations in Pelham range $6,500-$18,000 depending on materials, automation, and masonry preparation needed.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pelham
We carry stock for nine major automation brands - LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule - so Pelham customers aren’t waiting two weeks for a control board or replacement actuator. For coastal Westchester specifically, we keep Viking and DoorKing marine-rated operators on hand, along with Linear’s sealed-drive models that resist salt infiltration. When your 1930s gate needs a 2020s brain, we have the parts to marry them without compromise.
Common Gate Installation Problems We See in Pelham Homes
- Salt-air corrosion seizing swing gate hinges and latches prematurely. Pelham Manor’s proximity to Long Island Sound - roughly 2-3 miles east - accelerates iron oxidation via salt-laden air, causing wrought iron gates to pit and seize at hinges faster than inland Westchester towns. We specify marine-grade stainless hardware and custom-fabricated replacement hinges for every Pelham installation.
- Freeze-thaw cycles heaving gate post footings and cracking fieldstone pillar mortar. Southern Westchester’s freeze-thaw cycles are severe enough to heave gate post footings and crack mortar annually, destabilizing new installations. We excavate below the frost line and use high-strength concrete with expansion joints to prevent the shift that throws a gate out of alignment by March.
- Owners insisting on matching original decorative finials with door designs, driving up fabrication time. Technicians working Pelham Manor repeatedly find that original swing gates from the 1920s-1940s have decorative finials that are no longer manufactured, so repair calls often require custom fabrication or sourcing from salvage yards - a detail that sets pricing expectations here apart from newer-construction suburbs.
- Historic masonry pillars too deteriorated to support modern automation. The combination of aged wrought iron gates and deteriorating masonry pillars means most gate repair calls involve both metal fabrication and masonry restoration. We assess pillar integrity before quoting any Pelham installation, and we coordinate structural reinforcement when needed.
Pricing for Gate Installation in Pelham, NY
Honest pricing means telling you what a job costs before we start, not after we’re halfway through. Here are the ranges we see for Pelham’s market:
| Gate Type | Typical Range in Pelham |
|---|---|
| Standard steel swing gate (single, no automation) | $3,200-$4,800 |
| Steel swing gate with LiftMaster automation | $5,500-$8,500 |
| Custom wrought iron swing gate with automation | $7,500-$14,000 |
| Pedestrian gate with hardware | $1,800-$3,200 |
| Sliding gate with operator | $4,200-$9,500 |
| Double estate gate with full automation & access control | $8,500-$18,000 |
| Security gate with intercom/keypad integration | $5,500-$12,000 |
What moves a Pelham job toward the higher end: custom wrought iron fabrication to match existing estate work, masonry pillar rebuilding or reinforcement, smart-home integration with existing automation systems, and salvage-yard sourcing for discontinued decorative elements. Every estimate is free, every price is firm before work begins, and our standing offers apply - $50 off any repair over $250, free second opinion on any written estimate, $89 seasonal tune-up, and 5% senior and veteran discount always.
We Also Serve Cities Near Pelham
Our Gate Installation team routes daily through southern Westchester and the Bronx, serving Pelham Manor, Mount Vernon, New Rochelle, and Baychester with the same 90-Day Done Right Promise and live-answer phone support. Whether you’re on a Pelham Manor estate lane or a Baychester corner lot, the price structure and guarantee stay consistent.
Serving Pelham, NY - Our Local Coverage Area
We’re based in the Pelham area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Pelham
The salt-laden air accelerates iron oxidation, causing wrought iron gates to pit and seize at hinges and latches within five to seven years instead of the fifteen you’d see in inland Westchester. We specify marine-grade stainless hardware, sealed operators, and protective coatings as standard on every Pelham Manor installation. Call (833) 754-7503 to discuss specific protection for your property.
Yes - when original finials are no longer manufactured, we fabricate custom replicas in our shop or source from architectural salvage networks. This is routine for Pelham Manor’s 1920s-1940s estate gates, though it does add fabrication time and cost to the project. We’ll show you a sample before casting the final piece.
Yes - we regularly install modern automation, including smart-home-integrated LiftMaster operators, on historic swing gates throughout Pelham Manor. The key is proper hinge restoration and pillar reinforcement first, so the gate moves freely enough for the operator to work without strain. We assess this during your free estimate.
Yes - most Pelham Manor installations require some masonry attention, whether repointing fieldstone pillar mortar, replacing cracked brick, or pouring new footings below the frost line. We coordinate this work so your gate hangs true and stays true through freeze-thaw cycles. The pillar work is quoted upfront, never sprung as a surprise.
Aluminum with a powder-coated finish outlasts wrought iron in direct salt exposure, though many Pelham Manor homeowners choose galvanized steel with marine-grade hardware to preserve the traditional iron aesthetic. For automation, we recommend Viking or DoorKing sealed operators, or Linear’s salt-resistant drive systems. We’ll walk you through the trade-offs for your specific exposure and budget - call (833) 754-7503.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Pelham and southern Westchester since 1984.