Fast, Reliable Gate Installation Across Lilburn
Ironworks Gate Co. has been installing and replacing gates in Lilburn since 1984. We know the subdivisions along Rockbridge Road, the custom lots off Lawrenceville Highway, and the HOA requirements that govern every entrance gate in ZIP codes 30047 and 30048. If your driveway gate is sagging, your subdivision’s entrance operator keeps failing, or your architectural review board needs drawings and material specs before you can replace a panel, we handle the full job from footing to finish. Call (833) 754-7503 for a free estimate. A live person answers, 24 hours a day, 7 days a week.
Why Ironworks Gate Co. Is Lilburn’s Preferred Gate Installation Company
We’ve worked in Lilburn long enough to recognize the gate styles from specific subdivisions before we pull into the driveway. The ornamental iron swing gates at Parkview Heights, the sliding security gates along Camp Creek Road, the aluminum double gates in the Killian Hill area - we’ve repaired or replaced them all. Homeowners here remember the last contractor who showed up late, left a mess, or vanished when the gate started binding again six months later. We don’t operate that way.
Our technicians are background-checked, uniformed, and trained on nine automation brands including FAAC, BFT, and Linear. Most installations finish in a single visit. Our price is settled before we turn a single bolt. And every job carries our 90-Day Done Right Promise - written, no paperwork, no arguing. If it isn’t right, we come back and make it right.
Victor Salinas founded Ironworks Gate Co. in 1984, and the company still operates on the K.E.Y.S. values he established: Krafted right, Every time, Your home first, Standing behind it. The 400th gate installation in Lilburn receives the same care as the first.
Our Gate Installation Services in Lilburn
Swing Gate Installation
Swing gates remain the most common style in Lilburn’s brick-front subdivisions built between 1985 and 2005. We install single and double swing gates with proper concrete footings designed for Piedmont red clay - the critical detail most installers miss. A standard hinge adjustment won’t hold when the clay heaves 2-3 inches seasonally. We set posts deeper, with wider footings, so the gate still swings true after the fifth freeze-thaw cycle. Our Gate Installation team can match existing ornamental scroll patterns and paint colors to keep your installation ARB-compliant from day one.
Sliding Gate Installation
Sliding gates suit narrow Lilburn driveways and properties with steep grades where a swing arc would conflict with the street or sidewalk. We install cantilever and track-mounted systems, always spec’ing operators with sufficient torque for the gate’s weight plus a safety margin for ice loading. Gwinnett County catches harder freezes than Atlanta proper, and a sliding gate with an undersized operator will stall or strip gears when ice builds on the track. We size for reality, not for the catalog’s minimum rating.
Security Gate Installation
Lilburn homeowners on wooded custom lots and zero-lot-line subdivisions both need controlled access, but for different reasons. We install security gates with keypad, telephone entry, or app-based access control, integrated with your existing intercom or standalone. For neighborhoods with noise concerns, we spec quiet operators - belt-drive or hydraulic units that won’t disturb the neighbor’s bedroom window at 6 a.m. We also handle the low-voltage wiring correctly, using Schedule 80 PVC conduit instead of the rigid galvanized pipe that corrodes in wet clay within a decade.
Pedestrian Gate Installation
A pedestrian gate alongside your driveway gate completes the enclosure and controls foot traffic without requiring the full operator cycle. We match stile width, picket spacing, and ornamental details to your existing driveway gate so the pair reads as a single design. This matters in Lilburn’s older subdivisions where the HOA’s original specifications still govern replacement approvals.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lilburn
We are trained and equipped on nine major gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Lilburn customers, this means we stock common parts locally and diagnose correctly on the first visit. A technician who knows FAAC’s safety-loop logic or Linear’s limit-switch calibration won’t waste your time swapping parts that aren’t failed. We carry operators, control boards, safety devices, and hardware for same-day completion on most installations. If your subdivision’s original 1990s operator has finally quit, we can recommend a modern replacement that fits the existing footprint without rebuilding the entire gate structure.
Common Gate Installation Problems We See in Lilburn Homes
- ARB violations from mismatched replacement panels. Lilburn’s HOAs enforce strict material and color standards. We photograph the existing gate, obtain paint codes or spectrograph matches, and submit ARB packages with elevation drawings and material samples before work begins. A redo costs everyone time and money.
- Binding from clay heave misdiagnosed as operator failure. The heavy Piedmont red clay soil underlying Lilburn expands and contracts with seasonal rainfall, steadily heaving gate posts out of plumb. Sagging and binding recur unless the footing itself is reset, not just the hardware adjusted. We check post plumb with a laser level before touching the operator.
- Corroded low-voltage wiring in original 1990s installations. In early-1990s Lilburn subdivisions, low-voltage wiring runs were laid in rigid conduit directly in wet clay soil. That conduit has cracked and corroded, so operators that appear mechanically intact fail repeatedly at the circuit level. We test continuity and insulation resistance before condemning a motor.
- Ice storm damage to undersized operators and safety arms. Inland Gwinnett County catches ice storms more frequently than Atlanta’s core. Overloaded operators burn out; brittle safety arms snap. We size replacements for the actual weather, not the theoretical average.
Pricing for Gate Installation in Lilburn, GA
A typical pedestrian gate installation in Lilburn runs $1,800-$3,200. A single swing driveway gate with operator usually costs $3,500-$6,800. A double swing or sliding security gate with access control ranges from $6,500-$12,000, depending on material, automation complexity, and whether the existing footing can be reused. These figures include removal of the old gate, concrete work, operator, two remote controls, and our 90-Day Done Right Promise.
What moves the price: wrought iron versus aluminum, ornamental scrollwork density, access-control type, and whether the posts need full footing replacement due to clay heave. We inspect every site in person and provide a written, itemized estimate before you commit. Estimates are free. Call (833) 754-7503 to schedule.
| Gate Type | Typical Range in Lilburn |
|---|---|
| Pedestrian gate (manual) | $1,800 - $3,200 |
| Single swing driveway gate with operator | $3,500 - $6,800 |
| Double swing driveway gate with operator | $5,500 - $9,500 |
| Sliding security gate with access control | $6,500 - $12,000 |
| Subdivision entrance gate (dual operator) | $8,500 - $18,000 |
Active offers: $50 off any repair over $250; free second opinion on any written estimate; $89 seasonal tune-up; 5% senior and veteran discount always applied.
We Also Serve Cities Near Lilburn
Our crews work throughout Gwinnett County and beyond. We regularly install and repair gates in Lilburn and the surrounding communities of Lawrenceville, Norcross, Snellville, and Duluth. The same 90-Day Done Right Promise, the same upfront pricing, the same live-answer phone support applies in every city we serve.
Serving Lilburn, GA - Our Local Coverage Area
We’re based in the Lilburn area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Lilburn
Yes. We prepare complete ARB submittal packages including scaled drawings, material specifications, paint color codes, and photographs of the existing installation. Most Lilburn subdivisions along Rockbridge Road and in the Killian Hill area require 14-21 days for architectural review, so we build that timeline into our scheduling. Call (833) 754-7503 and we’ll review your HOA’s specific requirements during the free estimate visit.
Almost certainly yes. In Lilburn’s 1990s-era subdivisions, low-voltage wiring was run in rigid metal conduit buried directly in wet clay. Decades of corrosion have cracked that conduit and compromised wire insulation. The operator itself is likely fine. We test with a megohmmeter to confirm ground faults, then rewire in Schedule 80 PVC conduit rated for direct burial in expansive soil. Call (833) 754-7503 - we can diagnose this in one visit.
Yes. We spectrograph-match existing finishes or work from original manufacturer color codes when available. For gates installed during Lilburn’s 1985-2005 build-out, we maintain a reference library of common subdivision specifications. If the original paint is unavailable, we provide a sample panel for your ARB’s approval before full production. Estimates are free - call (833) 754-7503.
We recommend belt-drive or hydraulic operators from FAAC or BFT for zero-lot-line installations in Lilburn. These produce significantly less mechanical noise than chain-drive or screw-drive units. We also dampen gate leaf vibration with nylon hinge bushings and proper counterbalance. The operator specification matters, but so does the gate’s physical condition - a dragging or misaligned gate forces the motor to work harder and louder. We address both. Call (833) 754-7503 for a site evaluation.
No. In Lilburn, the Piedmont red clay soil expands and contracts so aggressively with seasonal rainfall that even a properly installed gate post can shift 2-3 inches out of plumb within a few years. A hinge adjustment will last one season, maybe two. The permanent fix is resetting the post with a deeper, wider concrete footing that extends below the clay’s active zone. We recently replaced a failing swing gate at the entrance of the Parkview Heights subdivision (off Rockbridge Road) where the original 1995 FAAC operator kept tripping the safety reverse. The root cause wasn’t the operator - it was the low-voltage wiring buried in cracked rigid conduit, corroded by decades of wet clay contact. We rewired the entire circuit in Schedule 80 PVC and reset the gate’s bottom hinge post with a deeper concrete footing to prevent future sagging. Call (833) 754-7503 for an inspection.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Lilburn since 1984.