Fast, Reliable Gate Installation Across Lexington
A new gate installation in Lexington typically runs $3,200-$8,500 for most residential properties, with swing and double-gate setups on the lower end and heavy-duty sliding systems for long estate drives toward the higher range. Most installations are completed in a single day, and our Gate Installation team carries the full inventory to do it without a return trip.
We’ve been driving out to Lexington since 1984 - long enough to know that a gate off Mass Ave near the Battle Green is a different job than one up on a wooded lot in Lexington Hills. The frost line here runs four feet deep. The historic districts have their own rules. And the homeowners we meet in Peacock Farm and along Route 2A don’t want excuses; they want it hung square, wired right, and guaranteed in writing. That’s what we deliver. Call (833) 754-7503 - a live person answers, 24 hours a day, 7 days a week.
Why Ironworks Gate Co. Is Lexington’s Preferred Gate Installation Company
Lexington homeowners tend to stay put. The houses are older, the lots are larger, and the gates are heavier than what you’ll find in newer suburbs. We’ve built our reputation here on showing up with the right equipment and the right knowledge - not learning the job on your driveway.
Our technicians are background-checked, uniformed, and trained on nine gate-automation brands, including Linear, Viking, and Ghost Controls. When we quote a job in Lexington, we factor in what we’ve learned from 42 years of local work: the frost heave that hits every March, the road-salt corrosion that eats iron hardware along Massachusetts Avenue, and the Historic Districts Commission review that can stop a project cold if nobody flagged it upfront.
We answer our own phones. No answering service, no callback queue. And every installation is protected by our 90-Day Done Right Promise - the Keystone Standard. If it’s not right, we come back and make it right. No paperwork, no arguing, no exceptions.
Our Gate Installation Services in Lexington
Sliding Gate Installation
Sliding gates are the practical choice for Lexington’s longer driveways, especially in Lexington Hills and on properties where a swing arc would carve into lawn or landscaping. We installed a heavy-duty sliding gate on a long driveway off Mass Ave near Lexington Hills; the homeowner needed a remote system for a detached workshop, and we used a LiftMaster pneumatic vehicle sensor for automated opening, avoiding post-heave issues by setting posts 4 feet deep with helical piers. A typical sliding gate installation in Lexington runs $4,500-$8,500, depending on track length, motor size, and whether we need to grade for drainage.
Swing Gate Installation
Swing gates remain the most common request we get in Lexington’s established neighborhoods - Peacock Farm, the side streets off Waltham Street, and the estate properties near the Burlington line. They suit the Colonial Revival and Federal-style architecture that dominates here. But swing gates demand precise post setting. Our frost line shifts concrete footings annually, and a post that starts plumb in September can lean by April. We set Lexington swing-gate posts 48 inches minimum, with reinforced concrete and, on heavier wrought-iron units, helical piers below the frost line. Single swing gates in Lexington typically run $3,200-$5,800; double swing gates run $4,800-$7,200.
Double Gate Installation
Double gates - two leaves meeting at a center seam - are standard for wider Lexington driveways, especially on mid-century ranch homes with broad frontages. The failure point is always the same: frost heave shifts one post more than the other, and by March the gates won’t meet flush. We’ve replaced dozens of center latches in Lexington that sheared from repeated slamming. Our double-gate installations include adjustable center stops and heavy-duty drop bolts that tolerate seasonal movement. We also align the automation carefully - two motors working in sequence need precise programming, or one leaf drags. Double gate installations in Lexington range from $4,800-$7,200 for manual systems, $6,500-$9,500 with full automation.
Pedestrian Gate Installation
Pedestrian gates in Lexington often serve as secondary access points - side yards, garden entries, pool enclosures. In historic districts near the Battle Green, these small gates frequently fall under HDC review, and homeowners are sometimes surprised to learn that even a 4-foot garden gate needs approval if it’s visible from the street. We fabricate and install pedestrian gates that match period details, from simple wrought-iron pickets to more ornate scrollwork. Typical pedestrian gate installation in Lexington: $1,800-$3,400.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lexington
We stock parts and full systems for nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Lexington customers, this means same-day completion on most installations - no waiting on a specialty part from a warehouse two states away. We’ve found Viking and Ghost Controls particularly reliable for the heavy estate gates common in Lexington Hills, where a standard residential opener would burn out in a season. Linear access controls hold up well against the humidity swings we see near the wetlands off Marrett Road. When you call (833) 754-7503, we ask the right questions about your gate weight, cycle frequency, and exposure so we spec the correct unit the first time.
Common Gate Installation Problems We See in Lexington Homes
- Frost heave shifts posts below grade. Lexington’s 3-4 foot frost penetration pushes concrete footings upward and laterally each winter. By early spring, double gates bind at the center seam and swing gates scrape the driveway. We prevent this with 48-inch minimum post depth, helical piers on heavy units, and expansion-joint detailing that accommodates seasonal movement.
- Road-salt corrosion attacks iron hardware. Properties along Massachusetts Avenue and Route 2A see accelerated rust on hinges, tracks, and opener arms from winter spray. We specify galvanized or stainless hardware for these locations and recommend annual rust-inhibitor treatment as part of our $89 Seasonal Tune-Up.
- HDC review stops unpermitted installations. Lexington’s Historic Districts Commission has jurisdiction over exterior changes, including gates, in designated districts near the Battle Green and Massachusetts Avenue corridor. Replacing a period-appropriate wooden gate with a modern aluminum panel without HDC sign-off can trigger a stop-work order and mandatory restoration. We flag this requirement before demo begins on any pre-1950 structure within district boundaries.
- Aging concrete footings crumble during retrofit. Many original hinge posts in Peacock Farm and near the town center were set in unreinforced concrete poured decades ago. When we remove an old gate, the footing often crumbles. We quote footing replacement upfront so there’s no surprise mid-job - a square deal, settled before a single bolt is turned.
Pricing for Gate Installation in Lexington, MA
Gate installation in Lexington costs more than in a newer suburb with shallow frost lines and no historic review. The work is heavier-duty, and the preparation is more involved. Here’s what we typically see:
| Gate Type | Typical Range in Lexington |
|---|---|
| Single swing gate (manual) | $3,200 - $5,800 |
| Double swing gate (manual) | $4,800 - $7,200 |
| Single swing gate (automated) | $5,500 - $8,200 |
| Double swing gate (automated) | $6,500 - $9,500 |
| Sliding gate (automated) | $4,500 - $8,500 |
| Pedestrian gate | $1,800 - $3,400 |
| Post replacement / footing (per post) | $650 - $1,400 |
Factors that push costs toward the higher end: helical piers for frost protection, HDC-required period materials, long driveway runs needing extended track or buried cable, and access-control add-ons like keypads, vehicle loops, or phone-entry systems. We provide upfront pricing before work begins - no surprises on the bill. Call (833) 754-7503 for a free estimate at your Lexington property.
Active offers: $50 Off Any Repair Over $250; Free Second Opinion on Any Written Estimate; $89 Seasonal Tune-Up; 5% Senior and Veteran discount, always.
We Also Serve Cities Near Lexington
Our crews work throughout the Route 2 corridor and beyond. If you’re in Lexington or nearby Arlington, Bedford, Winchester, or Burlington, the same live-answer phone line and same-day scheduling applies. We’ve installed gates on the larger lots in Bedford’s rural zones and the tighter driveways of Arlington’s neighborhoods - each with its own challenges, each handled with the same one-trip, done-right approach.
Serving Lexington, MA - Our Local Coverage Area
We’re based in the Lexington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Lexington
Yes, if your property is within a designated historic district, the Lexington Historic Districts Commission must review and approve exterior changes including gates and fencing before work begins. Homeowners who have skipped this step and installed modern materials on period-appropriate structures have received stop-work orders and been required to restore the original appearance. We identify HDC jurisdiction during our initial site visit and can guide you through the application timeline. Call (833) 754-7503 - estimates are free, and we’ll flag any regulatory requirements before you spend a dollar.
For heavy estate gates on long gravel drives, we typically spec Viking or Ghost Controls operators with higher torque ratings and external limit switches that tolerate dust and vibration better than standard residential units. The LiftMaster commercial-grade slide operators also perform well for automated sliding gates exceeding 800 pounds. We match the opener to your gate weight, cycle count, and driveway grade - not guesswork. Call (833) 754-7503 to schedule a load assessment.
Gate posts in Lexington must be set 48 inches minimum to get below the 3-4 foot frost line; for heavy wrought-iron or automated double gates, we recommend helical piers extending to stable subsoil. Posts set at 36 inches or less will heave within two winters, guaranteed. We’ve replaced too many gates in Peacock Farm and along Marrett Road where shortcuts at installation became expensive problems. Our standard depth is non-negotiable - it’s built into every Lexington quote.
If your home is within the historic district boundary, probably not without HDC approval of the material and design. The Commission typically requires period-appropriate materials - wrought iron or painted wood that matches the original character - and has ordered removal of non-conforming aluminum installations. Outside historic districts, aluminum is a practical, low-maintenance option that we install regularly. We can assess your property’s district status and recommend compliant materials during a free site visit. Call (833) 754-7503.
We install DoorKing and Linear keypads with sealed, weather-rated housings that withstand Lexington’s humidity swings and freeze-thaw cycles. Wireless models avoid trenching through established landscaping but require fresh batteries every 18-24 months; hardwired units are more reliable long-term but need buried low-voltage cable. For properties with multiple users - rental units, extended family compounds - we prefer keypad models with programmable entry codes rather than shared remotes that get lost or fail in cold weather. We’ll walk you through the trade-offs on site.
Ready to get your Lexington gate installed right the first time? Call Ironworks Gate Co. at (833) 754-7503. A live person will answer, 24 hours a day, 7 days a week. We’ll schedule your free estimate, confirm any HDC or zoning requirements, and quote an upfront price with our 90-Day Done Right Promise in writing. We’ve been serving Massachusetts homeowners since 1984. We’ll be here when you need us.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Lexington and surrounding communities since 1984.